용융염을 이용한 다이아몬드 표면의 크롬카바이드 코팅 (Chromium Carbide Coating on Diamond Particle Using Molten Salts)

서지정보

· 발행기관 : 한국재료학회
· 수록지 정보 : 한국재료학회지 / 28권 / 7호 / 423 ~ 427페이지
· 저자명 : 정영우, 김화정, 안용식, 최희락

초록

For diamond/metal composites it is better to use diamond particles coated with metal carbide because of improved wettability between the diamond particles and the matrix. In this study, the coating of diamond particles with a chromium carbide layer is investigated. On heating diamond and chromium powders at 800~900 oC in molten salts of LiCl, KCl, CaCl2, the diamond particles are coated with Cr7C3. The surfaces of the diamond powders are analyzed using X-ray diffraction and scanning electron microscopy. The average thickness of the Cr7C3 coating layers is calculated from the result of the particle size analysis. By using the molten salt method, the Cr7C3 coating layer is uniformly formed on the diamond particles at a relatively low temperature at which the graphitization of the diamond particles is avoided. Treatment temperatures are lower than those in the previously proposed methods. The coated layer is thickened with an increase in heating temperature up to 900 oC. The coating reaction of the diamond particles with chromium carbide is much more rapid in LiCl-KCl-CaCl2 molten salts than with the molten salts of KCl-CaCl2.

영어초록

For diamond/metal composites it is better to use diamond particles coated with metal carbide because of improved wettability between the diamond particles and the matrix. In this study, the coating of diamond particles with a chromium carbide layer is investigated. On heating diamond and chromium powders at 800~900 oC in molten salts of LiCl, KCl, CaCl2, the diamond particles are coated with Cr7C3. The surfaces of the diamond powders are analyzed using X-ray diffraction and scanning electron microscopy. The average thickness of the Cr7C3 coating layers is calculated from the result of the particle size analysis. By using the molten salt method, the Cr7C3 coating layer is uniformly formed on the diamond particles at a relatively low temperature at which the graphitization of the diamond particles is avoided. Treatment temperatures are lower than those in the previously proposed methods. The coated layer is thickened with an increase in heating temperature up to 900 oC. The coating reaction of the diamond particles with chromium carbide is much more rapid in LiCl-KCl-CaCl2 molten salts than with the molten salts of KCl-CaCl2.

참고자료

· 없음