센서 오차를 고려한 전류 적산과 확장 칼만 필터 방법의 배터리 SOC 추정 성능 비교에 관한 연구 (A Study on the comparison of Battery SOC estimation performance of Column Counting and Extended Kalman Filter Considering Sensor Errors)

서지정보

· 발행기관 : 한국조명.전기설비학회
· 수록지 정보 : 조명.전기설비학회논문지 / 34권 / 5호 / 43 ~ 50페이지
· 저자명 : 정대웅, 송하나, 윤재중

초록

Coulomb counting(CC) and Extended Kalman Filter(EKF) methods are most commonly used to estimate the state of charge(SOC) of a battery. However, the SOC estimation accuracy of these two methods is affected by the sensor error because these methods estimate SOC based on the voltage and current information measured by the sensor. This paper compared and analyzed the effect of the voltage and current sensor errors on the SOC estimation accuracy of the Coulomb counting(CC) and Extended Kalman Filter(EKF) methods. To verify the effect of the voltage and current sensor errors, on the SOC estimation accuracy, the above two methods were tested at the voltage sensor error of 1% ∼ 3%, and the current sensor error of 3% when the battery SOC discharged 100% to 0%. In the Coulomb counting(CC) method, the accumulation of current sensor errors degraded the SOC estimation accuracy. Also, in the Extended Kalman Filter(EKF) method, it was confirmed that the voltage sensor error degraded the SOC estimation accuracy more than the current sensor error. The simulation results show the importance of sensor filter design and sensor fault detection in SOC estimation. estimation.

영어초록

Coulomb counting(CC) and Extended Kalman Filter(EKF) methods are most commonly used to estimate the state of charge(SOC) of a battery. However, the SOC estimation accuracy of these two methods is affected by the sensor error because these methods estimate SOC based on the voltage and current information measured by the sensor. This paper compared and analyzed the effect of the voltage and current sensor errors on the SOC estimation accuracy of the Coulomb counting(CC) and Extended Kalman Filter(EKF) methods. To verify the effect of the voltage and current sensor errors, on the SOC estimation accuracy, the above two methods were tested at the voltage sensor error of 1% ∼ 3%, and the current sensor error of 3% when the battery SOC discharged 100% to 0%. In the Coulomb counting(CC) method, the accumulation of current sensor errors degraded the SOC estimation accuracy. Also, in the Extended Kalman Filter(EKF) method, it was confirmed that the voltage sensor error degraded the SOC estimation accuracy more than the current sensor error. The simulation results show the importance of sensor filter design and sensor fault detection in SOC estimation. estimation.

참고자료

· 없음