A Study on the Stability of the Single-Layer Latticed Dome during Erection Using the Step-Up Method

서지정보

· 발행기관 : 한국공간구조학회
· 수록지 정보 : 한국공간구조학회지 / 12권 / 4호
· 저자명 : Koo, Choong-Mo, Jung, Hwan-Mok, Kim, Cheol-Hwan

목차

Abstract
1. Introduction
2. Analytical Model
2.1 Model Geometry and Network Pattern
2.2 Construction concept of dome structure
2.3 Analytical method
3. Results and Review of Analysis
3.1 The review of point reaction and displacement according

영어초록

The large-space single-layer lattice dome is relatively simpler in terms of the arrangement of the various framework members and of the design of the junction than the multi-layered lattice dome, can reduce the numbers and quantity of the framework members, and has the merit of exposing the beauty of the framework as it stands. The single-layer lattice dome, however, requires a stability investigation of the whole structure itself, along with an analysis of the stress of the framework members, because an unstable phenomenon called "buckling" occurs when its weight reaches critical levels. Many researchers have systematically conducted researches on the stability evaluation of the single-layer lattice dome. No construction case of a single-layer lattice dome with a 300-m-long span, however, has yet been reported anywhere in the world. The large-space dome structure is difficult to erect due to the gigantic span and higher ceiling compared with other common buildings, and its construction cost is generally huge. The method of erecting a structure causes major differences in the construction cost and period. Therefore, many researchers have been conducting various researches on the method of erecting such structure. The step-up method developed by these authors can reduce the construction cost and period to a great extent compared with the other general methods, but the application of this method inevitably requires the development of system supports in the center section as well as pre-existing supports in the boundary sections. In this research, the safety during the construction of a single-layer lattice dome with 300-m-long span using pre-existing materials was examined in the aspect of structural strength, and the basic data required for manufacturing the supports in the application of the step-up method developed by these authors during the erection of the roof structure were obtained.

참고자료

· 없음