슬래그 연화 용융 거동에 미치는 첨가제 입도의 영향 (Effect of Additive Size on the Softening and Melting Behavior of Slag)

서지정보

· 발행기관 : 대한금속·재료학회
· 수록지 정보 : 대한금속·재료학회지 / 55권 / 8호 / 566 ~ 571페이지
· 저자명 : 오준석, 이재홍, 이준호

초록

The Paris climate change agreement made a commitment to keep global warming below 2 ℃. The Korean government confirmed that it would seek a 37% reduction in CO2 emissions by 2030 from the Business As Usual level. CO2 emissions from Korean iron and steel industries account for approximately 15.4% of that reduction. Therefore, breakthrough technologies are urgently required to reduce the CO2 emitted from iron and steel making processes. A high efficiency iron making process is needed, because present methods consume huge amounts of energy. One of the key technologies for high efficiency iron making is more effective slag making. Understanding the effects of basic oxide additives such as lime and dolomite on the slag melting is required. In this study, the effects of additives (CaO and MgO) on the melting behavior the CaO-SiO2-Al2O3(-MgO) slag were investigated using a high temperature in-situ observation technique. For the CaO-SiO2-Al2O3 system, when the particle size of CaO was increased, slag melting was delayed. When 10 wt% of 1-2 mm diameter CaO or MgO was added, it was observed that the MgO addition delayed melting of the CaO-SiO2-Al2O3-MgO system. Accordingly to facilitate slag melting, finer additives are recommended. In addition, it was determined that lime was more useful for making molten slag than dolomite.

영어초록

The Paris climate change agreement made a commitment to keep global warming below 2 ℃. The Korean government confirmed that it would seek a 37% reduction in CO2 emissions by 2030 from the Business As Usual level. CO2 emissions from Korean iron and steel industries account for approximately 15.4% of that reduction. Therefore, breakthrough technologies are urgently required to reduce the CO2 emitted from iron and steel making processes. A high efficiency iron making process is needed, because present methods consume huge amounts of energy. One of the key technologies for high efficiency iron making is more effective slag making. Understanding the effects of basic oxide additives such as lime and dolomite on the slag melting is required. In this study, the effects of additives (CaO and MgO) on the melting behavior the CaO-SiO2-Al2O3(-MgO) slag were investigated using a high temperature in-situ observation technique. For the CaO-SiO2-Al2O3 system, when the particle size of CaO was increased, slag melting was delayed. When 10 wt% of 1-2 mm diameter CaO or MgO was added, it was observed that the MgO addition delayed melting of the CaO-SiO2-Al2O3-MgO system. Accordingly to facilitate slag melting, finer additives are recommended. In addition, it was determined that lime was more useful for making molten slag than dolomite.

참고자료

· 없음