목재와 목질보드 복합적층재의 휨 크리프 성능 (Bending Creep Performances of Hybrid Laminated Woods Composed of Wood-wood Based Boards)

서지정보

· 발행기관 : 한국목재공학회
· 수록지 정보 : 목재공학 / 38권 / 1호 / 1 ~ 10페이지
· 저자명 : 박한민, 강동현, 최윤은, 안상열, 류현수, 변희섭

초록

이 연구에서는 목재의 효율적인 이용의 일환으로 스프루스 직교형적층재의 중층을 중밀도섬유판(medium density fiberboard, MDF), 파티클보드(particle board, PB) 및 오에스비(oriented strand board, OSB)의 3종류의 시판용 목질보드를 복합적층한 3층 목질계 복합적층재(패널)를 제작하여, 중층 목질보드라미나의 구성엘리멘트가 복합적층재의 휨 크리프성능에 미치는 영향을 조사하였다. 복합적층재의 휨 크리프곡선은 우측상변이급증하는 지수함수 그래프를 나타내었고, 각 복합적층재의 중층 목질보드라미나의 종류에 따라 다른 경향을 나타내었다. 복합적층재의 크리프변형은 표층섬유직각방향(C⊥ 타입)에서는 중층에 PB, MDF, OSB를 배열한 C⊥(P)타입 ＞ C⊥(M)타입 ＞ C⊥(O)타입의 순으로, OSB를 중층에 배열한 타입의 크리프변형이 MDF나 PB를 중층에 배열한 것의 2배 이상 적은 것이 확인되었고, 복합적층에 의해 스프루스 섬유직각방향의 크리프변형의 현저한 감소가 나타났다. 한편, 표층섬유방향(C∥ 타입)의 크리프변형은 중층에 PB, OSB, MDF를 삽입한 C∥(P)타입 ＞ C∥(O)타입 ＞ C∥(M)의 순이었으나, 복합적층에 의해 적층재상호간의 비는 현저히 감소하였고, 중층에PB와 OSB를 배열한 복합적층재의 크리프변형의 차이는 매우 적은 것이 확인 되었다. 이 값은 목질보드의 크리프변형보다는 0.108~0.464배의 적은 크리프변형을 나타내어 복합적층에 의해 목질보드의 크리프변형의 현저한감소가 나타났다. 복합적층재의 표층섬유방향에 대한 표층섬유직각방향의 크리프이방성은 초기변형보다 크리프변형이 현저히 컸지만, 스프루스 평행형적층재의 크리프이방성보다는 현저히 감소하는 것이 확인되었다.

영어초록

In this study, to study an effective use and improve strength performances of woods and wood-based materials, three-ply hybrid laminated woods which are composed of spruce in the face and three kinds of wood-based boards (MDF, PB, OSB) in the core were manufactured, and the effect of constitution elements used for the core laminae on bending creep performances was investigated. The shape of creep curves showed exponential function plots which the upper right side was increased, and differed among the kinds of wood-based boards used for the core laminae of hybrid laminated wood. The creep deformation perpendicular to the grain of faces of hybrid laminated woods was in order C⊥(P) > C⊥(M) > C⊥(O) with PB, MDF and OSB in the core,respectively. It was found that the creep deformation arranged with OSB in the core had 2 times smaller than those arranged with MDF and PB in the core. By hybrid laminating, the creep deformation of spruce perpendicular to the grain was markedly decreased. On the other hand, the creep deformation parallel to the grain of the faces (C∥ type) of hybrid laminated woods was in order C∥(P) > C∥(O) > C∥(M) with PB, OSB and MDF in the core. The ratios among three hybrid laminated woods were considerably decreased, especially the difference between C∥(P) and C∥(O)hybrid laminated woods arranged with PB and OSB in the core was very small. These values showed 0.108∼0.464 times smaller than creep deformation of three wood-based boards and it was found that creep deformation of three wood-based boards was considerably decreased by hybrid laminating. Creep anisotropy of hybrid laminated woods was greater in creep deformation than in initial deformation, whereas it was found that the values was much smaller than that of spruce parallel laminated woods.

참고자료

· 없음