고 흡수성 수지 첨가가 증류수의 과냉각 및 열적 특성에 미치는 영향 (Effects of Super Absorbent Polymer Addition on the Supercooling and Thermal Properties of Distilled Water)

서지정보

· 발행기관 : 조선대학교 공학기술연구원
· 수록지 정보 : 공학기술논문지 / 11권 / 3호 / 171 ~ 176페이지
· 저자명 : 이석준, 장정익, 김진혁, 이명규, 박설현

초록

This paper investigated the thermal properties of phase change materials (PCMs) prepared by adding a super absorbent polymer (SAP) to distilled water. The thermal properties of PCMs were investigated using differential scanning calorimeter (DSC) and T-history methods. It was found that 0.1 g SAP addition to distilled water resulted in the best PCM in terms of its thermal properties. The experimental results obtained from the DSC analysis showed that the addition of SAP to distilled water lowered the latent heat from 11.2 J/g to 17.2 J/g. However, the phase separation characteristics which are typically observed for water-based PCMs were found to be improved by adding the SAP. Similar behaviors were observed in results determined from the T-history method. Additionally, the T-history method clearly demonstrated that adding the SAP to distilled water improved the supercooling temperature, shortening the liquid retention time. Despite reductions in the latent heat of PCM with the SAP addition, it is expected that the operating cost of the cooling system can be further reduced due to its improved phase change characteristics such as phase separation and supercooling temperature when the PCM with the 0.1 g SAP added is applied.

영어초록

This paper investigated the thermal properties of phase change materials (PCMs) prepared by adding a super absorbent polymer (SAP) to distilled water. The thermal properties of PCMs were investigated using differential scanning calorimeter (DSC) and T-history methods. It was found that 0.1 g SAP addition to distilled water resulted in the best PCM in terms of its thermal properties. The experimental results obtained from the DSC analysis showed that the addition of SAP to distilled water lowered the latent heat from 11.2 J/g to 17.2 J/g. However, the phase separation characteristics which are typically observed for water-based PCMs were found to be improved by adding the SAP. Similar behaviors were observed in results determined from the T-history method. Additionally, the T-history method clearly demonstrated that adding the SAP to distilled water improved the supercooling temperature, shortening the liquid retention time. Despite reductions in the latent heat of PCM with the SAP addition, it is expected that the operating cost of the cooling system can be further reduced due to its improved phase change characteristics such as phase separation and supercooling temperature when the PCM with the 0.1 g SAP added is applied.

참고자료

· 없음