영문 건설관련 지질조사 시공계획서 입니다.

소개

건설 관련 자료(영문자료)
토공사
연약지반 지질조사 관련 시공계획서(Method statement)
영문으로 만든 시공계획서입니다.

목차

1. INTRODUCTION
2. SCOPE OF WORK
3. METHOD
3.1 Drilling and Sampling
3.2 Standard Penetration Test
3.3 Undisturbed Sampling
3.4 Laboratory Testing
4. PROCEDURES
4.1 Flow chart
4.2 Mobilization
4.3 Borehole Location Set Up
4.4 Drilling and Sampling Procedures
4.5 Reports
5. CONSTRUCTION SCHEDULE
6. ORGANIZATION
7. SAFETY CONTROL
8. ENVIRONMENT PROTECTION WORK

본문내용

1. INTRODUCTION

The soil investigation work is conducted to obtain soil parameters for the foundation design of HCMC Project.

2. SCOPE OF WORK

Soil investigation work includes drilling, soil sampling, site testing and laboratory testing.
A total of 44 boreholes will be drilled. Site works includes SPT test, collection of SPT samples, disturb samples and UD samples. Laboratory testing work includes physical properties of soil tests and Unconsolidated Undrained Triaxial Compression Strength test.

SPT tests are carried out immediately after taking the undisturbed soil sample and subsequently at intervals of 2m. SPT samples are collected by split barrel sampler. Disturb samples are collected for soil type verification. UD samples are tested for moisture content, bulk density and Unconsolidated Undrained Triaxial Compression Strength for all boreholes.

The main quantity of the work is as follows:
• Drilling & taking sample work:
Total boreholes : 44 Nos (3,030m long).
Where:
+ 09 boreholes of 100m deep: BH1, BH4, BH6, BH9, BH15, BH23, BH29,
BH33, BH44. (Drill into stable stratum of minimum 5m deep with N>50).
Total length is 900m.
+ 19 boreholes of 70m deep: BH3, BH5, BH7, BH10, BH14, BH16, BH17,
BH20, BH21, BH26, BH27, BH30, BH31, BH32, BH36, BH37, BH38, BH42,
BH43 (Drill into stable stratum of minimum 5m depth with N>50). Total
length is 1,330m

참고자료

· 없음