회귀분석법에 의한 임플란트 경부골 응력의 정량적 분석에 대한 연구 (Investigation of the Regression Analysis Method for a Quantitative Evaluation of Implant Crestal Bone Stresses)

서지정보

· 발행기관 : 대한턱관절교합학회
· 수록지 정보 : 구강회복응용과학지 / 24권 / 3호 / 299 ~ 310페이지
· 저자명 : 김우식, 조광헌, 이규복

초록

경부골 최대응력을 안정적으로 산출하기 위해서, 경부 디자인 형상이 비교적 단순한 메가젠 임플란트 모델을 대상으로, 유한요소 모델링을 통하여 경부골의 응력분포를 계산하였다. 그리고 산출된 응력분포를 회귀분석법으로 통계 처리하여 응력 집중점의 응력을 정량화 하였다. 결과는 모든 모델에서 경부골 응력은 치밀골 외면에 집중되었으며, 그 범위는 0.5mm 이내였다. 회귀분석법을 활용하기 위해서는 mesh 정밀도가 높아야 했으며, 이 경우 특이점의 최대 응력을 안정적으로 산출 할 수 있었다.

영어초록

In this study, the regression analysis method was tested for the estimation of peak stress at stress concentration area in the cervical bone. Submerge type EZ plus implant (Megagen. Daegu, Korea), 4.1 mm in cervical diameter and 9.6 mm in endosseous length, were axisymmetrically modelled together with surrounding alveolar bone of which the width was 10 mm. Vertical force of 100 N was applied to a head of crown above 8.5 mm from the outer surface of the cortical bone. Four different mesh models were composed of differently sized elements in vicinity of sharp corners, and they include 6 stress monitoring points that are located in the same geometrical points regardless of the differences in the meshes. Primary consideration was given to the stresses in the cortical bone surrounding the implant neck. The results showed that virtually all the stresses were concentrated in the cortical bone regardless of mesh designs. The peak stresses were successfully calculated by a regression analysis in a stable manner, as far as the mesh is designed to represent the acute gradient of stresses near the sharp corner.

참고자료

· 없음