공기식 태양광/열 집열기 내 저항체 형상조건과 유동 조건에 따른 열전달 성능 및 압력강하 분석 (Heat Transfer Performance and Pressure Drop Analysis According to Shape Conditions of Turbulent Promoters and Flow Conditions in Air-Type PV/T Collectors)

서지정보

· 발행기관 : 한국태양에너지학회
· 수록지 정보 : 한국태양에너지학회 논문집 / 42권 / 1호 / 87 ~ 101페이지
· 저자명 : 김성빈, 김준엽, 안병화, 김영복, 손창효, 윤정인, 최광환

초록

Air-type photovoltaic and thermal (PV/T) has a lower thermal capacity than liquid-type one; therefore, studies are being conducted turbulence promoters to improve heat transfer in a duct. This study aims to evaluate heat transfer performance and pressure drop while changing the increasing and decreasing ratio of turbulence promoters by using computational fluid dynamics (CFD). The increasing and decreasing ratio is a concept focused on increasing the height of turbulence promoters n times from the first row to the last row to generate high air temperatures at the outlet side. As a result, the difference in heat transfer performance according to the increasing and decreasing ratio was minimal; however, it was confirmed that the pressure drop increased in the order of 1.3, 1.2, and 1.1, because the increased resistance to air flow due to increased installation height of the turbulent promoters. Accordingly, it was found that the thermohydraulic performance parameter (THPP) increased in the order of 1.1, 1.2, and 1.3. Because of the changes for various shape conditions were not taken into account, additional consideration is required to select suitable conditions.

영어초록

Air-type photovoltaic and thermal (PV/T) has a lower thermal capacity than liquid-type one; therefore, studies are being conducted turbulence promoters to improve heat transfer in a duct. This study aims to evaluate heat transfer performance and pressure drop while changing the increasing and decreasing ratio of turbulence promoters by using computational fluid dynamics (CFD). The increasing and decreasing ratio is a concept focused on increasing the height of turbulence promoters n times from the first row to the last row to generate high air temperatures at the outlet side. As a result, the difference in heat transfer performance according to the increasing and decreasing ratio was minimal; however, it was confirmed that the pressure drop increased in the order of 1.3, 1.2, and 1.1, because the increased resistance to air flow due to increased installation height of the turbulent promoters. Accordingly, it was found that the thermohydraulic performance parameter (THPP) increased in the order of 1.1, 1.2, and 1.3. Because of the changes for various shape conditions were not taken into account, additional consideration is required to select suitable conditions.

참고자료

· 없음