지르코니아 코핑과 전장도재 간의 전단결합강도와 파절양상 비교 (A comparative study of the shear bond strength and failure mode between zirconia copings and veneering ceramics)

서지정보

· 발행기관 : 대한치과기공학회
· 수록지 정보 : 대한치과기공학회지 / 37권 / 4호 / 243 ~ 250페이지
· 저자명 : 김원영, 전병욱, 정인성

초록

Purpose: The aim of this study was to investigate the shear bond strength between various commercial zirconia coping and veneering ceramic, and to observe the failure mode.
Methods: For each zirconia block (iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent), 10 rectangular specimens were layered with Cercon ceram kiss, IPS e.max ceram, ICE Zirkon ceramic according to recommended by the manufacturer. The shear bond strength tests of the veneering porcelain to zirconia were carried out until fracture by a universal testing machine. After the shear bond tests, failure modes were characterized visually, under a stereomicroscope, such as adhesive, cohesive, or mixed. Data were analyzed with One-way ANOVA followed by Scheffe's tests.
Results: The shear bond strength (mean±SD) of zirconia-veneer ceramic were JC group 13.9±3.6 ㎫; JE group 17.7±2.4 ㎫; JI group 15.1±2.5 ㎫; LC group 9.5±1.5 ㎫; LE group 16.2±2.3 ㎫; LI group 12.6±0.8 ㎫; ZC group 16.0±2.3 ㎫; ZE group 18.5±3.4 ㎫; and ZI group 15.3±3.2 ㎫. The One-way ANOVA showed a significant difference between groups (p<0.05). The failure mode in most experimental groups was mixed failure, except for the LC group, which showed adhesive failure, and JE group, LE group and ZE group showed cohesive failure.
Conclusion: For IPS e.max ceram, the shear bond strength value was highest for all kinds of zirconia blocks. For ICE Zirkon transluzent, the shear bond strength value was highest for all kinds of veneering ceramics. Most of experimental group interfaces revealed mixed failure mode.

영어초록

Purpose: The aim of this study was to investigate the shear bond strength between various commercial zirconia coping and veneering ceramic, and to observe the failure mode.
Methods: For each zirconia block (iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent), 10 rectangular specimens were layered with Cercon ceram kiss, IPS e.max ceram, ICE Zirkon ceramic according to recommended by the manufacturer. The shear bond strength tests of the veneering porcelain to zirconia were carried out until fracture by a universal testing machine. After the shear bond tests, failure modes were characterized visually, under a stereomicroscope, such as adhesive, cohesive, or mixed. Data were analyzed with One-way ANOVA followed by Scheffe's tests.
Results: The shear bond strength (mean±SD) of zirconia-veneer ceramic were JC group 13.9±3.6 ㎫; JE group 17.7±2.4 ㎫; JI group 15.1±2.5 ㎫; LC group 9.5±1.5 ㎫; LE group 16.2±2.3 ㎫; LI group 12.6±0.8 ㎫; ZC group 16.0±2.3 ㎫; ZE group 18.5±3.4 ㎫; and ZI group 15.3±3.2 ㎫. The One-way ANOVA showed a significant difference between groups (p<0.05). The failure mode in most experimental groups was mixed failure, except for the LC group, which showed adhesive failure, and JE group, LE group and ZE group showed cohesive failure.
Conclusion: For IPS e.max ceram, the shear bond strength value was highest for all kinds of zirconia blocks. For ICE Zirkon transluzent, the shear bond strength value was highest for all kinds of veneering ceramics. Most of experimental group interfaces revealed mixed failure mode.

참고자료

· 없음