Pyroprocess Experiments at ENEA Laboratories

서지정보

· 발행기관 : 한국방사성폐기물학회
· 수록지 정보 : 방사성폐기물학회지 / 13권
· 저자명 : Giorgio DE ANGELIS, Elio BAICCHI, Mauro CAPONE, Carlo FEDELI, Massimo SEPIELLI, Giuliano TIRANTI, Mirko DA ROS, Francesca GIACOBBO, Marco GIOLA, Elena MACERATA, Mario MARIANI

영어초록

A new facility, known as Pyrel III, has been installed at ENEA laboratories for pyrochemical process studies under inactive conditions. It is a pilot plant which allows electrorefining and electroreduction experiments to be conducted on simulated fuel. The main component of the plant is a zirconia crucible. The crucible is heated by a furnace which is supported in an externally water-cooled well under the floor of a steel glove-box, where an argon atmosphere is maintained by a continual purge of about 10 Lmin-1. The vessel is loaded with LiCl-KCl eutectic salt (59-41 mol%) and is currently operated at 460 C. Several improvements on Pyrel II (the previous operating plant) have been introduced into Pyrel III. They are described in detail, together with the results from the first experimental campaign which used lanthanum metal.Moreover, studies about the treatment of chloride salt wastes from pyroprocesses have been conducted in parallel. They follow two main routes: on one hand, a matrix termed sodalite, a naturally occurring mineral containing chlorine, has been synthesized from a mix of nepheline, simulated exhausted salts and glass frit; on the other hand, a novel method proposed by Korea Atomic Energy Research Institute (KAERI) is under assessment. The final waste forms have been fully characterized with the support of the Politechnique of Milan, by means of density measurements, thermal analysis, and stereomicroscopy observations, FTIR, XRD, and RAMAN spectra, as well as leach tests under static conditions.

참고자료

· 없음