
[유기화학실험] TLC 에이플러스 받은 report
본 내용은
"
[유기화학실험] TLC 에이플러스 받은 report
"
의 원문 자료에서 일부 인용된 것입니다.
2024.07.16
문서 내 토픽
-
1. Thin Layer Chromatography (TLC)TLC의 원리와 이용 방법을 배운 후 이동상 sample들이 각자 무엇일지 유추해본다. 고정상과 이동상의 absorption을 통해 달라지는 Rf값을 계산하고 sample들의 극성을 비교해 본다.
-
2. Chromatography어떠한 시료에서 분리하거나 검출하고 싶은 이동상의 이동거리를 이용하여 물질을 분리하는 것이다. 고정상에 어느정도 adsorption하는지에 따라 이동거리가 달라져 물질이 분리된다. 이동상이란, 고정상에 대해 상대적으로 이동하여 나가는 기체나 액체를 말하고, 고정상이란, 시료의 특성차이를 이용하기 위해 사용되는 이동하지 않는 고체나 액체를 말한다.
-
3. Planar ChromatographyTLC, paper Chromatography 등이 있으며, 이번에 우리가 할 실험은 TLC인데, 박층 크로마토그래피라고 불리거나 얇은막 크로마토그래피라고도 불린다. TLC는 비휘발성 반응물의 정성 분석에 이용되며, 빠르게 결과를 도출할 수 있고 극소량의 시료로도 detection이 가능하다.
-
4. Adsorbent가장 많이 사용하는 고정상은 silica gel과 alumina인데, 우리는 silica gel을 사용한다.
-
5. Solvent system for TLC분리할 화합물에 따라 다른 solvent system을 사용한다. 가장 많이 사용되는 solvent system은 Chloroform:MeOH, EA:Hex이다. 원하는 실험 목적에 따라 Polarity를 조절하여 elution solvent를 만든다.
-
6. Solvent polarity for ChromatographyAcetic acid > water > methanol > ethanol > pyridine > 2-propanol > acetone > ethyl acetate > chloroform > diethyl ether > t-butyl metyl ether > dichloromethane > benzene > carbon tetrachloride > cyclohexane > petroleum ether(acetic acid, water, methanol은 산소를 가지고 있어 극성이 크다. 전기음성도가 크기 때문이다.)
-
7. Silica gel adsorptioncarboxylic acid, amines > amides > phenols > alcohols > aldehydes, ketones > halides > esters > unsaturated hydrocarbons > saturated hydrocarbon(흡착을 잘 할수록 극성이 크다. 잘 이동하지 못해서 Rf값이 작다.)
-
8. VisualizationUv 활성기가 있는 화합물은 uv lamp를 쬐어서 발색을 통해 확인할 수 있다. UV 비활성기를 가진 화합물은 staining해야한다. staining agent에 TLC plate를 담근 후 heating 해주면 발색한다.
-
9. Staining agentsPotassium Permanganate(KMnO4)와 PMA를 사용하는데, 전자는 보라색 배경에 노랑색 spot을 띠고 후자는 노란 배경에 검은 spot을 띤다.
-
10. Rf valuespot이 이동한 거리와 eluent가 이동한 거리의 비로 화합물과 용리액에 무엇인가에 따라 값이 달라진다.
-
1. Thin Layer Chromatography (TLC)Thin Layer Chromatography (TLC) is a widely used analytical technique in various fields, including chemistry, biochemistry, and pharmaceutical sciences. TLC is a simple, rapid, and cost-effective method for the separation, identification, and purification of a wide range of compounds. The technique involves the separation of analytes based on their differential migration on a thin layer of adsorbent material, typically silica gel or alumina, coated on a solid support. The separation is driven by the interaction between the analytes, the stationary phase, and the mobile phase (solvent system). TLC offers several advantages, such as the ability to analyze multiple samples simultaneously, the ease of sample preparation, and the versatility in the choice of mobile phases and detection methods. It is commonly used for qualitative and semi-quantitative analysis, as well as for the monitoring of chemical reactions and the purification of organic compounds. The interpretation of TLC results, including the calculation of Rf values and the identification of unknown compounds, requires a good understanding of the underlying principles and the factors that influence the separation process. Overall, TLC remains an essential tool in various fields of research and analysis, providing a simple yet powerful approach for the separation and characterization of complex mixtures.
-
2. ChromatographyChromatography is a powerful analytical technique that is widely used in various scientific disciplines, including chemistry, biochemistry, and environmental sciences. It is a separation method that relies on the differential partitioning of analytes between a stationary phase and a mobile phase. The stationary phase can be a solid, a liquid, or a combination of both, while the mobile phase can be a liquid or a gas. Chromatography techniques can be classified into different types, such as column chromatography, gas chromatography, and liquid chromatography, each with its own unique characteristics and applications. The separation of analytes in chromatography is based on their different physicochemical properties, such as polarity, size, charge, or affinity for the stationary phase. By optimizing the experimental conditions, such as the choice of stationary and mobile phases, the flow rate, and the temperature, researchers can achieve efficient separation and identification of complex mixtures. Chromatography is an indispensable tool in various fields, including analytical chemistry, biochemistry, environmental analysis, and pharmaceutical research, where it is used for qualitative and quantitative analysis, purification, and characterization of a wide range of compounds. The continuous development of new chromatographic techniques and the integration with other analytical methods, such as mass spectrometry, have further expanded the capabilities and applications of chromatography in modern scientific research.
-
3. Planar ChromatographyPlanar chromatography is a type of chromatographic technique that utilizes a flat, two-dimensional surface as the stationary phase. This includes techniques such as thin-layer chromatography (TLC) and paper chromatography. Planar chromatography offers several advantages over column-based chromatography methods. Firstly, it is a simple and cost-effective technique that requires minimal sample preparation and equipment. The flat surface allows for the simultaneous separation and analysis of multiple samples, making it suitable for screening and qualitative applications. Planar chromatography also provides a visual representation of the separation process, allowing for easy interpretation and identification of analytes based on their migration patterns and Rf values. Furthermore, the technique is versatile, as it can be used with a wide range of stationary phases, mobile phases, and detection methods, depending on the specific application and the properties of the analytes. Planar chromatography finds widespread use in various fields, including analytical chemistry, biochemistry, forensics, and environmental analysis, for the separation, identification, and purification of a diverse range of compounds, such as organic molecules, inorganic ions, and biomolecules. The continuous development of new stationary phase materials, detection methods, and data analysis tools has further enhanced the capabilities and applications of planar chromatography in modern scientific research and analysis.
-
4. AdsorbentAdsorbents are materials that have the ability to attract and hold molecules or ions on their surface through physical or chemical interactions. In the context of chromatography, adsorbents play a crucial role in the separation and purification of various compounds. The choice of adsorbent material is a critical factor in determining the efficiency and selectivity of the chromatographic process. Common adsorbents used in chromatography include silica gel, alumina, activated carbon, and ion-exchange resins, each with its own unique properties and applications. Silica gel, for example, is a widely used adsorbent in thin-layer chromatography (TLC) and column chromatography due to its high surface area, tunable polarity, and ability to separate a wide range of organic and inorganic compounds. Activated carbon, on the other hand, is commonly used for the removal of organic contaminants and the purification of natural products. The adsorption mechanism involves various intermolecular interactions, such as van der Waals forces, hydrogen bonding, and electrostatic interactions, between the adsorbent surface and the analytes. By carefully selecting the adsorbent material and optimizing the experimental conditions, researchers can achieve efficient separation, purification, and characterization of complex mixtures in various fields, including analytical chemistry, biochemistry, environmental analysis, and pharmaceutical research. The continuous development of new adsorbent materials and surface modifications has further expanded the capabilities and applications of adsorption-based chromatographic techniques.
-
5. Solvent system for TLCThe solvent system, also known as the mobile phase, is a critical component in thin-layer chromatography (TLC) as it plays a crucial role in the separation and migration of analytes on the stationary phase. The choice of the solvent system is determined by the nature and properties of the analytes, as well as the desired separation objectives. In TLC, the solvent system is typically a mixture of two or more solvents, each with different polarities and elution strengths. The polarity of the solvent system can be adjusted by varying the composition of the mixture, allowing for the optimization of the separation of both polar and non-polar compounds. Factors such as the solvent's dielectric constant, hydrogen-bonding ability, and solvation properties all contribute to the overall separation efficiency. The solvent system should be carefully selected to ensure the efficient separation and resolution of the target analytes, while also considering factors like cost, toxicity, and environmental impact. Additionally, the use of gradient elution, where the solvent composition is gradually changed during the chromatographic run, can further enhance the separation capabilities of the TLC system. The proper selection and optimization of the solvent system is a crucial step in the successful application of TLC for the analysis, purification, and characterization of a wide range of compounds in various fields, including analytical chemistry, biochemistry, and pharmaceutical research.
-
6. Solvent polarity for ChromatographySolvent polarity is a critical factor in the performance and selectivity of chromatographic techniques, as it directly influences the interaction between the analytes and the stationary phase. The polarity of the solvent system determines the degree of solvation and the partitioning of the analytes between the mobile phase and the stationary phase, which ultimately affects the separation and resolution of the compounds. In general, polar solvents, such as water, methanol, and acetonitrile, are more effective in eluting polar analytes, while non-polar solvents, such as hexane and toluene, are better suited for the separation of non-polar compounds. The polarity of the solvent system can be adjusted by using solvent mixtures, allowing for the optimization of the separation of a wide range of analytes with varying polarities. The choice of the solvent system is also influenced by factors such as the nature of the stationary phase, the analyte properties, and the desired separation objectives. In thin-layer chromatography (TLC), the solvent polarity is a crucial parameter that determines the Rf values and the separation patterns of the analytes. In column chromatography, the solvent polarity affects the retention times and the resolution of the separated compounds. The proper selection and optimization of the solvent polarity are essential steps in the development and application of chromatographic methods for the analysis, purification, and characterization of complex mixtures in various fields, including analytical chemistry, biochemistry, and pharmaceutical research.
-
7. Silica gel adsorptionSilica gel is a widely used adsorbent material in chromatographic techniques, particularly in thin-layer chromatography (TLC) and column chromatography. The adsorption of analytes on silica gel is a complex process that involves various intermolecular interactions, including van der Waals forces, hydrogen bonding, and dipole-dipole interactions. The adsorption behavior of analytes on silica gel is influenced by several factors, such as the surface properties of the silica gel, the polarity and functional groups of the analytes, and the composition of the mobile phase. Silica gel has a high surface area and a tunable polarity, which allows for the separation and purification of a wide range of organic and inorganic compounds. The polarity of the silica gel can be modified by the introduction of functional groups, such as amino, cyano, or octadecyl (C18) groups, to enhance the selectivity and separation of specific classes of compounds. The adsorption mechanism on silica gel involves the formation of hydrogen bonds between the silanol groups on the surface and the polar functional groups of the analytes, as well as the partitioning of non-polar analytes into the hydrophobic regions of the silica gel. By carefully controlling the experimental conditions, such as the mobile phase composition, the sample loading, and the elution order, researchers can achieve efficient separation, purification, and characterization of complex mixtures using silica gel-based chromatographic techniques. The understanding of silica gel adsorption principles is crucial for the development and optimization of chromatographic methods in various fields, including analytical chemistry, biochemistry, and pharmaceutical research.
-
8. VisualizationVisualization is a crucial step in chromatographic techniques, as it allows for the detection, identification, and quantification of the separated analytes. In thin-layer chromatography (TLC), visualization is typically achieved through the use of various detection methods, such as UV-Vis absorption, fluorescence, or the application of chemical reagents (staining agents). UV-Vis absorption is a common method for the detection of compounds that absorb light in the ultraviolet or visible region of the spectrum. Fluorescence detection is particularly useful for the analysis of compounds that exhibit natural fluorescence or can be derivatized with fluorescent labels. Chemical staining agents, such as iodine vapor, ninhydrin, or vanillin, can be used to visualize a wide range of organic and inorganic compounds by inducing color changes or fluorescence upon reaction with the analytes. The choice of the visualization method depends on the properties of the analytes, the desired sensitivity, and the specific application. In addition to TLC, visualization techniques are also employed in other chromatographic methods, such as column chromatography and high-performance liquid chromatography (HPLC), where the separated compounds are typically detected using in-line detectors, such as UV-Vis, fluorescence, or mass spectrometry. The proper selection and optimization of the visualization method are crucial for the accurate identification, quantification, and characterization of the separated analytes in various fields, including analytical chemistry, biochemistry, and pharmaceutical research.
-
9. Staining agentsStaining agents play a crucial role in the visualization and detection of separated compounds in chromatographic techniques, particularly in thin-layer chromatography (TLC). Staining agents are chemical reagents that react with specific functional groups or classes of compounds, resulting in the formation of colored or fluorescent products that can be easily detected on the TLC plate. The choice of the staining agent depends on the nature of the analytes, the desired sensitivity, and the specific application. Common staining agents used in TLC include: 1. Iodine vapor: A universal staining agent that reacts with a wide range of organic compounds, producing brown or yellow spots. 2. Ninhydrin: Specific for the detection of amino acids and proteins, producing purple-colored spots. 3. Vanillin: Useful for the detection of terpenes, steroids, and other organic compounds, resulting in colored spots. 4. Anisaldehyde: Effective for the visualization of terpenoids, steroids, and carbohydrates, producing colored spots. 5. Dragendorff's reagent: Specific for the detection of alkaloids, forming orange-colored spots. 6. Cerium(IV) sulfate: Useful for the detection of reducing sugars and other organic compounds, producing colored spots. The staining process typically involves dipping or spraying the TLC plate with the staining agent, followed by heating or exposure to UV light to develop the colored or fluorescent spots. The intensity and color of the spots can provide information about the identity and quantity of the separated compounds. Staining agents can also be used in combination to enhance the selectivity and sensitivity of the visualization process. The proper selection and optimization of the staining agents are crucial for the accurate identification, characterization, and quantification of the separated analytes in various fields, including analytical chemistry, biochemistry, and pharmaceutical research.
-
10. Rf valueThe Rf (Retention factor) value is a crucial parameter in thin-layer chromatography (TLC) that provides information about the relative mobility and separation of analytes on the stationary phase. The Rf value is defined as the ratio of the distance traveled by the analyte to the distance traveled by the solvent front (mobile phase) on the TLC plate. Mathematically, the Rf value is calculated as: Rf = Distance traveled by the analyte / Distance traveled by the solvent front The Rf value ranges from 0 to 1, with 0 indicating that the analyte is completely retained on the stationary phase (no migration) and 1 indicating that the analyte has the same mobility as the solvent front (complete elution). The Rf value is influenced by various factors, including the nature of the analyte, the polarity of the stationary phase, the composition of the mobile phase, and the experimental conditions. By carefully controlling these factors, researchers can optimize the separation and identification of compounds in complex mixtures using TLC. The Rf value is a valuable tool in TLC analysis, as it provides the following benefits: 1. Identification of compounds: The Rf value, in combination with other analytical techniques, can be used to identify unknown compounds by comparing their Rf values with those of known standards. 2. Monitoring of reactions: Rf values can be used to monitor the progress of chemical reactions by tracking the appearance or disappearance of specific compounds on the TLC plate. 3. Purification of compounds: The Rf value can guide the selection of appropriate mobile phases and stationary phases for the purification of target compounds using column chromatography or preparative TLC. 4. Quantitative analysis: The Rf value can be used in conjunction with densitometric or spectrophotometric techniques to quantify the amount of a specific compound in a sample. The accurate determination and interpretation of Rf values are crucial for the successful application of TLC in various fields, including analytical chemistry, biochemistry, and pharmaceutical research.
-
11. VisualizationVisualization is a critical step in chromatographic techniques, as it allows for the detection, identification, and quantification of the separated analytes. In thin-layer chromatography (TLC), visualization is typically achieved through the use of various detection methods, such as UV-Vis absorption, fluorescence, or the application of chemical reagents (staining agents). UV-Vis absorption is a common method for the detection of compounds that absorb light in the ultraviolet or visible region of the spectrum. This technique is particularly useful for the analysis of aromatic compounds, conjugated systems, and inorganic ions. Fluorescence detection, on the other hand, is advantageous for the analysis of compounds that exhibit natural fluorescence or can be derivatized with fluorescent labels. This method offers higher sensitivity and selectivity compared to UV-Vis absorption. Chemical staining agents, such as iodine vapor, ninhydrin, or vanillin, can be used to visualize a wide range of organic and inorganic compounds by inducing color changes or fluorescence upon reaction with the analytes. These staining agents target specific functional groups or classes of compounds, allowing for the selective detection and identification of the separated analytes. The choice of the visualization method depends on the properties of the analytes, the desired sensitivity, and the specific application. In addition to TLC, visualization techniques are also employed in other chromatographic methods, such as column chromatography and high-performance liquid chromatography (HPLC), where the separated compounds are typically detected using in-line detectors, such as UV-Vis, fluorescence, or mass spectrometry. The proper selection and optimization of the visualization method are crucial for the accurate identification, quantification, and characterization of the separated analytes in various fields, including analytical chemistry, biochemistry, and pharmaceutical research. The continuous development of new detection technologies and the integration of chromatographic techniques with advanced analytical methods have further expanded the capabilities and applications of visualization in modern scientific research.
-
12. Staining agentsStaining agents play a crucial role in the visualization and detection of separated compounds in chromatographic techniques, particularly in thin-layer chromatography (TLC). Staining agents are chemical reagents that react with specific
-
고분자기초실험, 추출 레포트(A+) 5페이지
REPORT제목 : 추출Ⅰ. 실험목적Ⅱ. 실험원리Ⅲ. 실험기구 및 시약Ⅳ. 실험방법Ⅴ. 실험결과Ⅵ. 고찰Ⅶ. 참고문헌Ⅰ. 실험목적1. Acryl계 단량체인 Methylmethacrylate(MMA)에 포함된 중합금지제를 추출을 통해 제거한다.2. 산 해리상수(pK _{a})의 차이를 이용해 혼합물을 분리하는 방법을 이해한다.Ⅱ. 실험원리? 추출: 추출은 고체 또는 액체 중에 포함되어 있는 불순물을 용매를 사용하여 분리해 내는 조작을 말한다.: 추출의 종류에는 크게 액체-액체 추출과 고체-액체 추출이 있다.: 일반적으로 액체-액체 추...2022.12.06· 5페이지 -
[유기화학실험] extraction 에이플러스 레포트 13페이지
..FILE:mimetypeapplication/hwp+zip..FILE:version.xml..FILE:Contents/header.xml^1.^2.^3)^4)(^5)(^6)^7^8..FILE:BinData/image1.png..FILE:BinData/image2.png..FILE:BinData/image3.png..FILE:BinData/image4.png..FILE:BinData/image5.jpeg..FILE:BinData/image6.jpeg..FILE:BinData/image7.png..FILE:BinData/image8...2024.07.13· 13페이지 -
인하대 유기합성 예비보고서 6페이지
유기합성 – 알데하이드의 환원반응Reduction of 4 – Chlorobenaldehyde with NaBH4실험 조:작성자:학번:실험 일자제출 일자 :담당 조교 이름 :“나는 자랑스런 인하인으로, 스스로의 힘으로 정직하게 레포트를 작성하였습니다.” + 이름 + 서명________________________________________________________________________________________________________________________실험 목적Aldehyde을 Alcohol로 만드는 환...2020.09.15· 6페이지 -
유기화학실험 esterification 16페이지
유기화학실험 Report-071. Subject esterification2. Date 2023.05.03.수3. Name4. Principle4-1. 원리 및 이론-Preparation of alkyl ester(ROOR): 일반적으로 carbonyl compound를 기준으로 Alcohol or alkyl halide와 반응하는 다음의 3가지 method가 있다.Figure 1. preparation of alkyl esters(바로 아래에 각각 일치하는 번호의 반응에 대한 설명이 있다.) eq \o\ac(○,1) convers...2023.07.17· 16페이지 -
[유기화학실험] esterification 에이플러스받은 레포트 17페이지
..FILE:mimetypeapplication/hwp+zip..FILE:version.xml..FILE:Contents/header.xml^1.^2.^3)^4)(^5)(^6)^7^8..FILE:BinData/image1.png..FILE:BinData/image2.png..FILE:BinData/image3.jpg..FILE:BinData/image4.jpg..FILE:BinData/image5.jpeg..FILE:BinData/image6.jpeg..FILE:BinData/image7.png..FILE:BinData/image8...2024.07.13· 17페이지