Infusion pump 사용방법

문서 내 토픽

1. Infusion Pump

Infusion Pump는 수액 또는 고위험 약물을 주입할 때 주입량을 주의 깊게 조절하여 투약해야 하는 경우 사용하는 기계입니다. 정맥 주입 속도를 조절하는 장치로 튜브나 용액에 양압을 가해 용액이 일정한 속도로 정맥에 주입되도록 하는 장치입니다.
2. Infusion Pump 사용방법

Infusion Pump 사용방법은 다음과 같습니다. 1. 전기코드를 연결한다. 2. 펌프 뒷면에 Power 버튼을 켠다. 3. 앞면의 ON/OFF 버튼을 2초동안 눌러서 켠다. 4. Infusion pump용 IV set에 air 없이 약물을 채운 상태로 준비한다. 5. 펌프의 door를 두 번을 연다. 6. IV set를 위, 아래 홈버튼(움푹 들어간 부분)에 끼워 장착한다. 7. 2개의 door를 닫고 IV set의 clamp를 연다. 8. 3개의 표시등(T.Vol, I.Vol, F.Rate)의 의미를 확인한다. 9. SEL 버튼을 눌러 T.Vol, I.Vol, F.Rate를 조정한다. 10. START 버튼을 눌러 작동시킨다. 11. 주입이 종료되면 알람이 울리고, 화면에 'COMP'알람이 깜빡인다. 12. ON/OFF 버튼을 2초간 눌러 PUMP를 끈다.
3. Infusion Pump 알람

Infusion Pump에는 다음과 같은 알람이 있습니다. OCCL: Occlusion. 주입중 막혔을 때, Infusion set의 꼬임, 잘못된 장착, 주사바늘이 막혀서 약물주입이 되지 않을 때, 수액세트의 3way가 잠겼을 때. LOCK: Key Lock, insuion pump 뒷면에 lock이 걸려 있어서 모든 버튼이 안눌려지게 된다. AIR: Insion set에 air가 있을시, 주입되고 있던 수액이 다 들어간 후, 남아있는 수액이 없을 경우. DOOR: 주입중에 door open시. COMP: complete. 총 주입예정량이 전부 주입되었을 때. BATT: 배터리 잔량이 30분 이내일때.
4. Infusion Pump 기능 버튼

Infusion Pump에는 다음과 같은 기능 버튼이 있습니다. BOLUS: 주입정지나 주입중에 BOLUS키를 계속 꾹 누르고 있으면 누르는 동안 약물이 계속 주입된다. 주입을 중단하고 싶으면 STOP버튼을 누르고 START한다. PAUSE: Set mode에서 설정한 시간동안 주입이 정지되었다가 설정한 시간이 지나면 다시 주입시작 된다. STOP: 약물 주입의 정지 or BOLUS주입을 정지할 때 사용한다. CLEAR: 주입대기상태(STOP버튼)로 만든후, SEL를 눌러서 T.Vol/I.Vol/F.Rate이 세군데 중 한군데의 표시등 깜빡 거릴 때 clear 버튼을 길게 3초 누르면 해당표시등 값이 0으로 초기화된다. START: SEL설정을 마치고 주입시작을 할 때 사용한다. ON/OFF: ON키는 누르는 즉시 기계의 전원이 켜지고, OFF키는 길게 누르면 전원이 꺼진다.

Easy AI와 토픽 톺아보기

1. Infusion Pump

Infusion pumps are essential medical devices used in healthcare settings to precisely deliver fluids, medications, and other solutions to patients. They play a crucial role in ensuring accurate and controlled administration of these vital substances, which can be critical for patient safety and treatment outcomes. Infusion pumps come in various types, such as syringe pumps, volumetric pumps, and patient-controlled analgesia (PCA) pumps, each designed to meet specific clinical needs. These devices are equipped with advanced features like programmable flow rates, dose limits, and alarm systems to monitor and regulate the infusion process. Proper use and maintenance of infusion pumps are crucial to prevent medication errors, ensure patient safety, and optimize treatment efficacy. Healthcare professionals must be well-trained in the operation and troubleshooting of these devices to provide the best possible care for their patients.
2. Infusion Pump 사용방법

The proper use of an infusion pump is essential for ensuring patient safety and the effective delivery of medications or fluids. Healthcare professionals should be thoroughly trained on the specific operation of the infusion pump model they are using. This includes understanding the pump's interface, programming the desired flow rate and volume, setting appropriate alarms and limits, and properly loading the IV tubing and medication cartridge or bag. It is also crucial to follow the manufacturer's instructions and hospital protocols for priming the pump, troubleshooting any issues that may arise, and properly documenting the infusion details. Careful monitoring of the patient's response and the pump's performance is necessary throughout the infusion process. Adherence to best practices and continuous education on infusion pump use can help minimize the risk of medication errors and ensure optimal patient outcomes.
3. Infusion Pump 알람

Infusion pumps are equipped with various alarm systems to alert healthcare providers of potential issues or deviations from the programmed infusion parameters. These alarms play a crucial role in ensuring patient safety and the proper delivery of medications or fluids. Common infusion pump alarms may include occlusion alarms (indicating a blockage in the IV line), air-in-line alarms (detecting the presence of air bubbles), low battery alarms, and end-of-infusion alarms. Healthcare professionals must be trained to promptly recognize and respond to these alarms, as they can indicate a potentially serious problem that requires immediate attention. Proper troubleshooting and resolution of the underlying issue are essential to prevent adverse events and ensure the continuity of care. Regular maintenance, calibration, and testing of the infusion pump's alarm systems are also important to ensure their reliable and effective operation.
4. Infusion Pump 기능 버튼

Infusion pumps are equipped with various functional buttons and controls that allow healthcare professionals to program, monitor, and adjust the infusion process. These buttons typically include options for setting the flow rate, volume to be infused, and infusion duration, as well as buttons for starting, pausing, and stopping the infusion. Many pumps also have buttons for accessing advanced features, such as programming dose limits, selecting different infusion modes (e.g., continuous, intermittent, or patient-controlled), and reviewing infusion history and logs. It is crucial for healthcare providers to be thoroughly familiar with the location and function of each button on the specific infusion pump model they are using. Proper understanding and utilization of these buttons and controls can help ensure the safe and effective delivery of medications or fluids, minimize the risk of medication errors, and enable healthcare professionals to respond promptly to any issues that may arise during the infusion process.

주제 연관 토픽을 확인해 보세요!

주제 연관 리포트도 확인해 보세요!