논리회로실험_VHDL을 이용한 신호등 설계
- 최초 등록일
- 2011.07.06
- 최종 저작일
- 2010.12
- 25페이지/ 압축파일
- 가격 3,000원
소개글
VHDL을 이용해서 신호등 설계한 것입니다.
문서파일과 소스파일입니다.
문서파일은 영어로 되어있으며, 설계과정 및 각 소스 파일에 대한 첨부설명이 되어 있습니다.
키트는 한백전자에서 만든 FPGA가 사용되었습니다. 문서파일에 구현된 사진도 함께 첨부되어 있으니, 좋은 참고자료가 될 것입니다.
A+받은 자료이니 많이 활용해보세요
목차
1. Object
2. Default Source
3. Additional Condition
4. Code analysis
① clock_divider
② interval_counter
③ top_traffic
④ dot_matrix
⑤ VFD
⑥ LED
⑦ segment
⑧ motor
5. Simulation
6. Conclusion
7. Consideration
본문내용
1. Object
- Using the traffic lights module mounted on HBE-COMBO II, implement traffic lights controller easily accessible in our lives.
- Traffic light sequence is shown below.
- The behavior of traffic light for each situation are as follows.
2. Default Source
- clock_divider : Clock-divider generates lower frequency clock.
This code does not need to be modified. We use this code as it is.
Detailed explanation of clock_divider is in the `code analysis`.
- interval_counter : Interval_counter makes count. This code is used as it is, too.
Detailed explanation of clock_divider is in the `code analysis`.
- top_traffic : Top traffic is main code of traffic system. It controls all actions of the traffic lights system. We should add algorithm to this code for accomplishment of this project.
3. Additional Condition
- In the case of an emergency, control traffic lights.
- The direction of ambulance are four direction (North, East, South, West sides).
- After emergency state, it should return to previous state.
- If implement additional features, get bonus points.
참고 자료
없음
압축파일 내 파일목록
Sourceclock_divider.vhd
Sourcedot_matrix.vhd
Sourceinterval_counter.vhd
SourceLED.vhd
Sourcemotor.vhd
Sourcesegment.vhd
Sourcetop_traffic.vhd
SourceVFD.vhd
논실_신호등_프로젝트.hwp