인슐레이터용 알루미나의 치밀화에 미치는 MgO의 함량과 소결 온도의 영향
(주)코리아스칼라
- 최초 등록일
- 2023.07.31
- 최종 저작일
- 2023.06
- 6페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국분말야금학회
ㆍ수록지정보 : 한국분말야금학회지 / 30권 / 3호
ㆍ저자명 : 김리주, 정한결, 손예지, 고상기, 홍현선
목차
1. 서 론
2. 실험 방법
3. 결과 및 토론
3.1 MgO의 함량 및 소결 온도에 따른 밀도 변화
3.2 MgO의 함량 및 소결 온도에 따른 결정 구조 분석
3.3 MgO의 함량 및 소결 온도에 따른 미세구조 분석
4. 결 론
감사의 글
영어 초록
The influence of MgO addition on the densification and microstructure of alumina (Al2O3) was studied. Compacted alumina specimens were manufactured using ball-milling and one-directional pressing followed by sintering at temperatures below 1700oC. Relative density, shrinkage, hardness, and microstructure were investigated using analytical tools such as FE-SEM, EDS, and XRD. When the MgO was added up to 5.0 wt% and sintered at 1500oC and 1600oC, the relative density exhibited an average value of 97% or more at both temperatures. The maximum density of 99.2% was with the addition of 0.5 wt% MgO at 1500oC. Meanwhile, the specimens showed significantly lower density values when sintered at 1400oC than at 1500oC and 1600oC owing to the relatively low sintering temperature. The hardness and shrinkage data also showed a similar trend in the change in density, implying that the addition of approximately 0.5 wt% MgO can promote the densification of Al2O3. Studying the microstructure confirmed the uniformity of the sintered alumina. These results can be used as basic compositional data for the development of MgOcontaining alumina as high-dielectric insulators.
참고 자료
없음
"한국분말야금학회지"의 다른 논문
더보기 (4/9)