알루미나 중공사 한외여과막 제조 및 특성평가
(주)코리아스칼라
- 최초 등록일
- 2023.04.05
- 최종 저작일
- 2018.02
- 10페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국막학회
ㆍ수록지정보 : 멤브레인 / 28권 / 1호
ㆍ저자명 : 김여진, 김성중, 김 정, 조영훈, 박호식, 이평수, 박유인, 박호범, 남승은
목차
Abstract
1. 서 론
2. 실험방법
3. 결과 및 토의
4. 결 론
감 사
Reference
한국어 초록
본 연구에서는 sol-gel법을 이용하여 균일하고 결함을 최소화한 세라믹 한외여과막을 제조하였다. 알루미나 중공 사 정밀여과막 지지체의 기공 크기를 줄이기 위해, 합성된 boehmite sol과 sol-ethanol 혼합 용액을 사용하여 dip coating법으 로 지지체 표면 위에 γ-알루미나 활성층을 형성시켰다. pristine sol을 이용하여 4회 이상 코팅했을 경우 박막층의 두께가 상당히 증가하여 균열 및 박리현상을 야기시키고, 3회 코팅을 진행하였을 경우 표면 결함이 최소화된 최적의 시료를 얻을 수 있었다. 또한, 소결 온도가 γ-알루미나 활성층의 기공 크기에 미치는 영향을 분석하였다. 소결 온도가 1000°C일 때 가장 높 은 순수 투과도 값을 보였으며, 10 nm 크기의 dextran 분획분자량(molecular weight cut-off (MWCO) : 51 kDa)이 관찰되었다. 600, 800°C에서 소결한 막의 경우, 12 kDa MWCO (dextran 5 nm)를 갖는 것으로 확인되었다. 결과적으로, 코팅 용액의 조성은 박막층의 두께에 큰 영향을 주었고, 소결 온도에 따라 분획분자량이 크게 영향을 받는 것을 알 수 있었다.
영어 초록
In this study, homogeneous and defect-free ceramic ultrafiltration membranes were fabricated by using the sol-gel method. A boehmite sol was synthesized and coated onto the surface of alumina hollow fiber microfiltration membranes. The effect of sol viscosity and surface tension on the coating layer homogeneity and thickness was investigated. The optimum coating repetition using pristine sol was determined to be 3 times, as the samples coated more than 4 times showed delamination. Fixing the coating repetition to 3 times, the effect of sintering temperature was also studied in this work. The samples sintered at 1000°C exhibited the highest pure water permeability with the molecular weight cut-off (MWCO) of approximately 51 kDa (10 nm dextran), and the samples sintered at 600, 800°C displayed the MWCO of 12 kDa (5 nm dextran). The ultrafiltration membranes prepared in this work showed competitive performance compared to the reported ceramic ultrafiltration membranes.
참고 자료
없음