* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 20권 / 5호
ㆍ저자명 : 이상우, 신대영, 변철웅
ㆍ저자명 : 이상우, 신대영, 변철웅
한국어 초록
소화시스템에 사용되는 고압의 소화가스 저장용기에는 저장용기의 파손을 막아주는 안전밸브가 있다. 이러한 안전밸브의 내부에는 원형 박판의 파열 판이 들어 있는데, 저장용기의 내압이 위험수준에 도달하면 파열 판이 파손하여 내압을 배출하는 역할을 한다. 안전밸브의 설계인자는 파열 판의 두께, 안전밸브의 유로 직경, 플라스틱 패킹 링의 내부 직경 그리고 파열 판을 고정하는 볼트 안쪽의 필렛 반경이 있다. 이중에서 파열 판의 두께는 0.2mm로 고정을 하였다. 요인배치법을 사용하여 주효과를 결정하였고 회귀방정식을 유도하였다. 이러한 회귀방정식은 추후 안전밸브의 설계에 있어서 기초 설계 자료로서 활용할 수 있도록 실험 결과와 비교하여 검증하였다. 검증실험 및 회귀방정식에 의한 결과의 오차는 약 정도인 것을 확인하였다. 그리고 반응표면법을 사용하여 기밀테스트 압력인 25MPa에서 파열할 수 있는 안전밸브의 최적 모델을 결정하였다.영어 초록
High pressure storage of the agent gas in fire suppression system was composed of tank, main valve and safety valve, which prevents the fracture of the high pressure storage. The safety valve has circular thin plate as fracture plate that was destroyed over fracture pressure. When inner pressure of the storage is reached the fracture pressure, the safety valve discharges gas and degrades simultaneously the inner pressure of the storage. There are design variables such as flow path diameter, inner diameter of the plastic packing ring, thickness of plate and fillet radius. In this variables, thickness of plate is set to be a value of 0.2mm. The main effect of variables on the inner pressure, has been decided using factorial design and statistical analysis. Therefore, the relation of variables are expressed by regression equation. It is disclosed results that the difference of fracture pressures between the equation and experiment has . Finally, using response surface method, the optimal design of the safety valve could be decided with safety pressure of 25MPa, where the fracture occurs on circular thin plate.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
- Optimal Active-Control & Development of Optimization Al..10페이지
- Optimal Active-Control & Development of Optimization Al..9페이지
- 강바닥판 교량의 포장시 열영향 해석을 위한 등가열원 산정기법8페이지
- 송전철탑의 내풍안전성 평가를 위한 1/2축소부분구조 실험12페이지
- 점성감쇠기를 이용하는 흡수경계의 성능 향상에 관한 연구12페이지
- Kanai-Tajimi 필터 인공지진 가진된 마찰형 감쇠를 갖는 구조물의 변위 응답 확률분포6페이지
- 해상 풍력 발전용 Tubular와 Jacket Type Tower의 진동 특성에 관한 연구7페이지
- LNG 운반선용 펌프타워의 구조해석 GUI개발에 관한 연구9페이지
- 주형과 상판과의 상호작용이 단순 사교의 동적거동에 미치는 영향12페이지
- Elastica of Cantilever Column with Constant Volume Subj..12페이지