* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 20권 / 2호
ㆍ저자명 : 조맹효, 최진복, 노희열
ㆍ저자명 : 조맹효, 최진복, 노희열
한국어 초록
본 연구에서는 NURBS곡면식을 바탕으로 하는 곡면 모델링과 쉘 유한요소해석의 효율적인 연동체계를 개발하고자 한다. 기하학적으로 정확한 쉘 유한요소해석에서 정확한 기하량의 계산은 필수적이며, 따라서 곡면을 표현하는 일반적인 방법인 NURBS곡면식으로 부터 필요한 기하량을 직접 계산한다면 보간에 의해 발생할 수 있는 기하학적 오차를 줄임으로써 해의 수렴성을 높일 수 있다. 아울러 기하학적으로 정확한 쉘 유한요소를 일반적인 곡면에 적용하기 힘들었던 한계점을 극복하여 수학적으로 표현 가능한 단순한 곡면들뿐만 아니라, NURB곡면식으로 표현 가능한 일반적인 곡면의 해석이 가능하게 되어 적용범위를 확장할 수 있다. 본 연구에서는 곡면을 생성함에 있어 주어진 데이터 점들을 보간하여 NURBS곡면을 생성하는데, 이러한 데이터들은 일반적으로 곡면의 스캐닝을 통해 얻을 수 있다. 곡면을 보간하여 NURBS곡면을 생성하는 과정에서 사용되는 매개변수 정의방식에 때라 생성된 곡면의 정확성이 차이를 보이므로 곡면의 형상에 따라 적합한 방식을 사용하여 곡면을 보간 할 필요가 있다. 몇 가지 잘 알려진 수치예제를 통하여 개발된 연동체계의 성능과 정확성을 검증하고 그 결과를 비교 분석하였다.영어 초록
The linkage framework of surface geometric modeling based on the NURBS and shell finite element analysis is developed in this study. In the geometrically exact shell finite element analysis, the accuracy of the analysis strongly depends upon the accurate computation of the surface geometric quantities. Therefore if we obtain the necessary geometric quantities from the NVRBS surface equation, it's possible to construct the effective linkage framework of surface modeling in the CAD systems and shell finite element analysis using geometrically exact shell finite element. Besides, the linkage framework can be applied to the analysis of general and complex surfaces as well as simple surfaces. In this study, the shell surfaces are generated by interpolating given set of data points based on the NURBS surfaces. These data points usually can be obtained from surface scanning. But the representations of the generated NURBS surface are not same to one another. The accuracy depends on the chosen parameterization methods used in NURBS. Therefore, it is needed to select the suitable parameterization method according to the geometry of the surfaces. To verify the performance and accuracy of our developed linkage framework, we solve several well-known benchmark problems and assess the performance of the developed method.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
- 동적 지반강성을 갖는 지반-구조물계의 실시간 하이브리드 진동대 실험9페이지
- 볼트로 체결된 강재 조립 합성보의 휨 거동10페이지
- 포화된 다공성매체에서 파동의 전파특성 II. 파라미터 연구16페이지
- 데이터베이스에 기반한 RC 평면 프레임 구조물의 최적설계15페이지
- 고준위폐기물 열에 의한 처분용기 및 처분용기 주위 구조물의 시간경과에 따른 온도분포 변화8페이지
- 비선형 구조물에 대한 수정 슬라이딩모드 제어알고리즘 성능 평가9페이지
- 여러 개의 파사드리거를 갖는 고층구조물에서 리거의 최적위치10페이지
- 비동질 반무한 평면에서의 비례경계유한요소법10페이지
- 탄성지반위에 놓인 박벽보의 강성행렬산정을 위한 개선된 해석기법13페이지
- 임펄스 가진에 의한 근해역 통합채광시험 양광시스템의 파이프 동적 과도응답 해석7페이지