유동해석을 통한 내부 ECV의 비교 분석
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2014.02
- 6페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국기계기술학회
ㆍ수록지정보 : 한국기계기술학회지 / 16권 / 1호
ㆍ저자명 : 김한국, 조행묵
목차
Abstract
1. 서론
2. 해석 모델 및 조건
2.1 솔레노이드 밸브 해석 모델
2.2 Ansys를 이용한 해석
3. 유동 해석 결과
3.1 Pc포트 4.0 mm(Type-1)의 해석 결과
3.2 Pc포트 3.8 mm(Type-2)의 해석 결과
4. 결론
후기
References
영어 초록
This paper carried out a comparative analysis with papers on the analysis and analytic research of conventional solenoid. In case the current of solenoid valve is cut off, a flow path is formed from pressure port (Pc) connected with the crankcase of compressor to Ps port. At this time, the size of Pc port hole was so adjusted (Type-2) that it was smaller than 4.0mm(Type-1) of original hole by 0.2mm. After that, it was thought that an effect would be produced on the flow change of refrigerant which came into the solenoid vale, therefore the flow characteristics in moving from Pc port to Ps port was predicted and comparatively analyzed. According to the results of flow analysis, a velocity of approximately 46m/s and 129m/s was shown at the maximum in case of 0.2 and 1.5 MPa in Type-1, and the maximum velocity of approximately 500m/s and 1400m/s was shown in case of Type-2.
참고 자료
없음
"한국기계기술학회지"의 다른 논문
더보기 (5/10)