VCHP를 적용한 냉시동 가능 전력 반도체 냉각기의 작동특성에 관한 연구
(주)코리아스칼라
- 최초 등록일
- 2016.04.01
- 최종 저작일
- 2010.12
- 7페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국기계기술학회
ㆍ수록지정보 : 한국기계기술학회지 / 12권 / 4호
ㆍ저자명 : 강환국, 조운
목차
Abstract
1. 서론
2. 히트파이프 냉각기의 구조와 성능실험
2.1 냉각기의 구조와 열적 사양
2.2 냉각기 성능실험장치와 방법
3. 냉각기의 시동성과 작동특성
3.1 냉시동 특성
3.2 작동특성과 열저항
4. 결론
참고문헌
영어 초록
A heat pipe heat sink which is possible to frozen start up at the lower than -20℃ by using a VCHP was designed, manufactured and tested. The VCHP uses water and nitrogen gas as the working fluid and non-condensable gas. The test results showed that the VCHP heat sink started up successfully at the range of -20 to -30℃ of the ambient temperature and 1000 to 2600W of the heat flow rate. The thermal resistance of the VCHP heat sink decreased as increased the heat flow rate and the ambient temperature since the active zone of VCHP increased.
참고 자료
없음
"한국기계기술학회지"의 다른 논문
더보기 (5/10)