CFD를 이용한 나선형 튜브 열교환기에서 강제대류의 열유동특성에 관한 연구
(주)코리아스칼라
- 최초 등록일
- 2023.04.05
- 최종 저작일
- 2018.04
- 8페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국기계기술학회
ㆍ수록지정보 : 한국기계기술학회지 / 20권 / 2호
ㆍ저자명 : 이원재, 김진황, 윤준규
목차
ABSTRACT
1. 서 론
2. 해석모델
2.1 지배방정식
2.2 수치해석
2.3 난류모델의 타당성 검증
3. 결과 및 고찰
3.1 나선형 튜브내의 유동특성
3.2 나선형 튜브내의 열전달특성
3.3 나선형 튜브의 기하학적 변화에 따른 열전달특성
4. 결 론
References
영어 초록
In this study, the CFD analysis was performed by changing the geometry of coil-tube diameter ratio, coil winding number, coil pitch, and cross section of the tube to investigate the heat flow characteristics of forced convection in a helical coil-tube heat exchanger using RSM (Reynolds Stress Model). As a result, the secondary flow was developed in the tube caused by the influence of centrifugal force. It improved the heat transfer on the outer side of the tube, but on the inner side was not performed well. And the temperature rose locally in the tube region. Also the pressure drop in the tube was proportional to the diameter ratio of the coil-tube and the inlet velocity, and it was found that pressure drop and friction factor were inversely proportional. When the coil winding number and coil pitch were increased, it affected heat transfer in the low speed range of 0.1 ~ 0.2 m/s, but did not affect the flow condition after this range.
참고 자료
없음
"한국기계기술학회지"의 다른 논문
더보기 (5/10)