접합요소를 이용한 볼트 접합부의 유한요소해석
(주)코리아스칼라
- 최초 등록일
- 2023.04.05
- 최종 저작일
- 1994.06
- 8페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 7권 / 2호
ㆍ저자명 : 변대근, 윤성기, 박성수
한국어 초록
볼트 접합부의 정확한 해석을 위하여 접합 요소와 볼트 요소 및 쉘 요소를 사용한 방법을 개발하였다. 접합면을 단순하게 이상화시키는 접합 요소와 장력을 갖는 볼트 요소를 도입하였고, 전체적인 계산과정은 2단계, 즉 제안된 방법에 의한 초기 강성의 결정과 뉴턴-랩슨법에 근거하는 호장법을 이용한 비선형 거동의 추적으로 구분하여 행함으로써 계산의 효율성을 증대시켰다. 앵글을 사용한 반강접 접합부와 모멘트 판을 사용한 접합부를 해석하여 기존 실험 및 해석과 비교함으로써 제안한 방법의 정확성과 적용성을 입증하였다. 또한 볼트 접합부의 정확한 해석을 위해서는 접합면에서 발생하는 미끄럼짐의 고려가 반드시 필요하며 접합부를 구성하는 판재의 3차원적인 변형의 해석도 무시할 수 없는 역할을 하는 사실을 보여주었다.
영어 초록
In this study, the finite element analysis using joint elements, bolt elements, and shell elements is presented to investigate the behavior of bolted connections. The contact of plates and the high-strength, pretensioned bolts are simply idealized by joint elements and bolt elements, respectively. The initial stiffness is determined through the presented method and the non-linear analysis is archived by a constant-arc-length method based on Newton-Raphson method. The analysis results of a semi-rigid connection(web & flange angles) and a moment connection (shear & moment plates) demonstrate the exactness and applicability of the presented method. And the results indicates that the consideration of slip and 3-dimensional deformation is needed for an accurate prediction of bolted connections.
참고 자료
없음
"한국전산구조공학회 논문집"의 다른 논문
더보기 (4/9)