나노 실리카 하이브리드 박막의 산소 투과 특성
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국유화학회
ㆍ수록지정보 : 韓國油化學會誌 / 24권 / 2호
ㆍ저자명 : 김성우
ㆍ저자명 : 김성우
한국어 초록
본 연구에서는 졸-겔 공법을 이용하여 가스 차단 특성을 갖는 SiO2/EVOH(에틸렌 비닐알콜 공중합체) 하이브리드 물질을 제조하였다. 제조된 여러 조성의 하이브리드 졸을 표면 처리한 biaxially oriented polypropylene (BOPP) 기지재에 스핀 코팅 방식을 이용하여 코팅하였다. X선 회절 및 DSC 분석에 의해 하이브리드 내의 EVOH 상과 실리카 상 사이의 결합에 따른 결정화 거동의 변화를 조사하였다. 또한 SiO2/EVOH 하이브리드 겔의 모폴로지 관찰을 통하여, 100nm 이하의 실리카 입자들이 균열하게 분산된 매우 치밀한 상 미세구조를 갖는 하이브리드 물질을 제조하기 위해 필요한 Tetraethylorthosilicate (TEOS) 무기전구체의 최적 함량이 존재함을 알 수 있었다. 첨가된 TEOS 함량이 최적 함량보다 낮거나 높은 경우에는 큰 도메인의 입자 클러스터들이 형성되어 매우 불안정한 모폴로지를 나타내는 상분리 현상이 관찰되었다. 이러한 모폴로지 결과는 하이브리드 코팅 필름의 산소 투과도의 변화 결과와 일치하였는데, TEOS 함량이 0.01 - 0.02mol로 첨가되어 제조된 하이브리드로 코팅된 필름의 경우 매우 우수한 산소 차단 특성을 나타냈으며, 0.04mol 이상으로 첨가되었을 때는 상 분리 및 미세 균열 발생으로 인하여 그 차단 특성이 급격하게 감소하는 것으로 나타났다.영어 초록
In this study, SiO2/poly(ethylene-co-vinyl alcohol)(EVOH) hybrid coating materials with gas barrier property could be produced using sol-gel method. The biaxially oriented polypropylene (BOPP) substrate with surface pretreatment was coated with the prepared hybrid sols containing various inorganic silicate component by a spin coating method. Crystallization behavior of the hybrids was investigated in terms of analysis of X-ray diffraction and cooling thermogram from DSC experiment. From the morphological observation of the SiO2/EVOH hybrid gel, it was confirmed that there existed an optimum content of inorganic silicate precursor, Tetraethylorthosilicate (TEOS), to produce hybrid materials with dense microstructure, exhibiting uniformly dispersed silica particles with average size below 100 nm. When TEOS was added at below or above the optimum content, particle clusters with large domain were observed, resulting in phase separation. This morphological result was found to be in good agreement with that of oxygen permeability of the hybrid coated films. In the case of film coated with hybrid prepared from addition of 0.01 - 0.02mol of TEOS, a remarkable improvement in barrier property could be obtained, however, with the addition of TEOS more than 0.04 mol, the barrier property was dramatically reduced because of phase separation and micro-crack formation on the film surface.참고 자료
없음"韓國油化學會誌"의 다른 논문
- 인과 염소 함유 변성폴리에스터/이소시아네이트 가교 폴리머의 PU 난연도료에의 적용16페이지
- 카프로락톤기 함유 90% 고형분인 아크릴수지의 하이솔리드 도료에의 적용11페이지
- 실리콘 코팅을 이용한 poly(ethylene naphthalate) 고온용 방열 필름의 제조7페이지
- 대칭적 Triazine 유도체들에 의한 중성 유제층의 경막시험에 관한 연구6페이지
- 브로일러에 대한 감마리놀렌산의 급원으로써 달맞이꽃종자유와 삼씨유;닭 껍질, 다리살 및 가슴살 지질의..9페이지
- 알칼리 촉매에 의한 우지(Beef Tallow)와 그 혼합지방의 Biodiesel화6페이지
- 인계화합물을 포함한 재활용 폴리우레탄폼의 난연성8페이지
- 유변학적 특성과 표면장력측정을 통한 음이온성 폴리머와 비이온성 계면활성제의 상호작용에 대한 연구7페이지
- 파라디옥사논의 고순도 정제를 위한 발한(sweating) 공정에 관한 연구9페이지
- Clofibrate의 연고기재에 의한 피부투과 특성7페이지