[워드2003]디통_Design of Communication System in AWGN Channel
- 최초 등록일
- 2009.03.01
- 최종 저작일
- 2008.11
- 6페이지/ MS 워드
- 가격 3,800원
소개글
*이 레포트는 워드 2007파일로 작성되었습니다. 2003파일로 올린 이유는 레포트를 미리보기 하실 수 있도록 따로 올린 것이니, 다운로드는 제 문서박스 중 "전파공학"폴더에서 2007파일을 받으시길 권장합니다.*
*본문과, 목차는 2007파일을 다운받으실 때 확인하실 수 있습니다*
매트랩을 이용해 AWGN채널에서 주어진 대역폭과 BER을 만족시키면서 최대한으로 주파수 효율을 높여 최대한의 성능을 낼 수 있도록 통신 시스템을 설계한다.
목차
1. 설계 배경
2. 설계 목표 및 방향
3. Design Constraints (Requirements)
본문내용
1. 설계 배경
The bandwidth is the most precious resource especially in wireless communications. There are many researches on going to cope with the scarcity of the bandwidth and to reduce the cost per bit. In this design, you will experience the tradeoffs of the communication systems and learn which transmission techniques are better for high spectral efficiency and their challenges in implementation.
2. 설계 목표 및 방향
- 설계 목표 : 주어진 대역폭과 BER을 만족시키면서 최대한으로 주파수 효율을 높여 최대한의 성능을 낼 수 있도록 통신 시스템을 설계한다.
- 설계 방향 : 먼저 Uncoded System에 대해서 주어진 조건들을 만족하면서 최대한의 성능을 낼 수 있는 변조방법과, 변조차수를 선택한 후 채널코딩(예를들어 Convolutional code)을 통해, 좀더 향상된 성능을 갖는 통신 시스템을 설계할 것이다.
3. Design Constraints (Requirements)
● Bandwidth : 200kHz
● Carrier frequency : 3 GHz
● In the AWGN channel
- BER requirement : 10e-3
- Es/No = 10 dB = 10 (∵10log1010=10dB)
- Minimum spectral efficiency : 2 bps/Hz
⇒ 위 조건에서 Minimum spectral efficiency가 2bps/Hz이고, Bandwidth가 200kHz이므로 아래와 같이 Data Rate을 구할 수 있다.
참고 자료
-Digital Communications Fundamentals and Applications – Bernard Sklar
-Contemporary Communication Systems using MATLAB – John G. Proakis Masoud Salehi
-Introduction to Wireless and Mobile Systems – AGRAWAL, ZENG