적층방향에 따른 3D프린팅 콘크리트의 면내 및 면외 구조 성능 평가 연구
(주)코리아스칼라
- 최초 등록일
- 2023.11.06
- 최종 저작일
- 2023.11
- 10페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국지진공학회
ㆍ수록지정보 : Jorunal of the Earthquake Engineering Society of Korea / 27권 / 6호
ㆍ저자명 : 안효서, 이가윤, 이성민, 신동원, 이기학
목차
1. 서 론
1.1 3D프린팅 연구 개요
1.2 3D프린팅 시공 사례
2. 실험 계획
2.1 재료 실험
2.2 실험 구성
2.3 실험체 계측 및 가력 계획
2.4 실험 변수의 도출
3. 실험 결과
3.1 압축강도 실험결과
3.2 휨강도 실험결과
3.3 패널 휨강도 실험결과
4. 해석 결과
4.1 유한요소해석 내의 재료 물성치 및 모델링 절차
4.2 실험 vs. 유한요소해석 결과 분석
감사의 글
영어 초록
In this study, the structural performance of the specimen fabricated through 3D printing was evaluated through monotonic loading experiments analysis to apply to 3D printed structures. The compression and flexural experiments were carried out, and the experimental results were compared to the finite element model results. The loading directions of specimens were investigated to consider the capacity of specimens with different curing periods, such as 7 and 28 days. As a result, the strength tended to increase slightly depending on the stacking direction. Also, between the 3D-printed panel composite and the non-reinforced panel, the bending performance depended on the presence or absence of composite reinforcement.
참고 자료
없음
"Jorunal of the Earthquake Engineering Society of Korea"의 다른 논문
더보기 (5/10)