* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 대한상하수도학회
ㆍ수록지정보 : 상하수도학회지 / 30권 / 3호
ㆍ저자명 : 박상봉, 김진원, 오경석, 김민철, 구자용
ㆍ저자명 : 박상봉, 김진원, 오경석, 김민철, 구자용
목차
1. 서 론2. 위치탐사 실험장치의 구성 및 실험방법
2.1 실험장치의 하드웨어 구성
2.2 위치보정 알고리즘
2.3 실험방법
3. 기초실험 및 결과
3.1 Tract test 단거리 기초실험
3.2 Road Test 장거리 공간 기초실험
4. 결 론
References
영어 초록
A variety of methods for detecting the location of an underground water pipeline are being used across the world; the current main methods used in South Korea, however, have the problems of low precision and efficiency and the limitations in actual application. On this, this study developed locator capable of detecting the location of a water pipe by the use of an IMU sensor, and technology for using the extended karman filter to correct error in location detection and to plot the location on the coordinate system. This study carried out a tract test and a road test as basic experiments to measure the performance of the developed technology and equipment. As a result of the straight line, circular and ellipse track tests, the 1750 IMU sensor showed the average error of 0.08-0.11%; and thus it was found that the developed locator can detect a location precisely. As a result of the 859.6-m road test, it was found that the error was 0.31 m in case the moving rate of the sensor was 0.3-0.6 m/s; and thus it was judged that the equipment developed by this study can be applied to long-distance water pipes of over 1 km sufficiently. It is planned to evaluate its field applicability in the future through an actual pipe network pilot test, and it is expected that locator capable of detecting the location of a water pipe more precisely will be developed through research for the enhancement of accuracy in the algorithm of location detection.참고 자료
없음태그
"상하수도학회지"의 다른 논문
- 전처리 MF의 다양한 역세 공정을 적용한 하수재이용 파일럿 플랜트 연구7페이지
- 초음파 조사가 직접 접촉식 막증발 공정의 막오염과 막젖음에 미치는 영향8페이지
- 온도와 압력 변화가 압력지연삼투 공정 성능에 미치는 영향5페이지
- 막증류 공정에서 오염 인자가 플럭스 변화에 미치는 영향8페이지
- 중공사막 진공 막증류 모듈의 하우징 누수가 담수 생산에 미치는 영향 분석7페이지
- 역삼투-압력지연삼투 조합공정 공정모사 및 비용예측 프로그램 개발14페이지
- 알칼리 활성화 방법에 따른 고로슬래그 경화체 제조 연구5페이지
- 하수 처리 과정의 염소 소독에 대한 여러 박테리오파지들의 저항성 평가; 물 재이용 과정의 안전성 관..7페이지
- 압력지연삼투(PRO) 공정에서 막 모듈 배치와 유입원수의 유입 흐름방식이 성능에 미치는 영향8페이지
- 막증류 공정의 전처리 공정으로서 천연 제올라이트 컬럼 적용6페이지