하수 2차처리 방류수의 총인 고효율 처리를 위한 응집･막분리 혼성처리

서지정보

ㆍ발행기관 : 대한상하수도학회 ㆍ수록지정보 : 상하수도학회지 / 32권 / 1호
ㆍ저자명 : 최욱진, 이병하, 박준홍, 차호영, 이병찬, 송경근

목차

ABSTRACT
1. 서 론
2. 실험재료 및 방법
2.1 실험재료
2.2 응집 실험
2.3 막여과 실험
2.4 분석방법
3. 결과 및 고찰
3.1 응집･막분리 공정에 있어서 분리막의 공경이 응집floc 제거에 미치는 영향
3.2 응집․막분리 공정의 응집제 종류, 주입 농도에 따른 처리수질 비교
3.3 분리막의 flux에 영향을 미치는 인자에 대한 조사
4. 결 론
사 사
References

영어 초록

This study investigated phosphorus removal from secondary treated effluent using coagulation-membrane separation hybrid treatment to satisfy strict regulation in wastewater treatment. The membrane separation process was used to remove suspended phosphorus particles after coagulation/settlement. Membrane separation with 0.2 μm pore size of micro filtration membrane could reduce phosphorus concentration to 0.02 mg P/L after coagulation with 1 mg Al/L dose of polyaluminum chloride (PACl). Regardless of coagulant, the residual concentration of phosphorus decreased as the dose increased from 1.5 to 3.5 mg Al/L, while the target concentration of 0.05 mg P/L or less was achieved at 2.5 mg Al/L for the aluminum sulfate (Alum) and 3.5 mg Al/L for PACl. Moreover, alum showed better membrane flux as make bigger particles than PACl. Alum showed a 40% of flux decrease at 2.5 mg Al/L dose, while PACl indicated a 50% decrease of membrane flux even with a higher dose of 3.5 mg Al/L. Thus, alum was more effective coagulant than PACl considering phosphorus removal and membrane flux as well as its dose. Consequently, the coagulation-membrane separation hybrid treatment could be mitigate regulation on phosphorus removal as unsettleable phosphorus particles were effectively removed by membrane after coagulation.

참고 자료

없음