터널 화재 시 피해 복구 진단을 위한 철근의 고온 노출에 따른 인장거동 연구
(주)코리아스칼라
- 최초 등록일
- 2023.04.03
- 최종 저작일
- 2023.02
- 8페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국도로학회
ㆍ수록지정보 : 한국도로학회논문집 / 25권 / 1호
ㆍ저자명 : 최승원, 장태진, 주민규, 심재원, 김승원, 박철우
목차
ABSTRACT
1. 서론
1.1. 연구의 배경 및 목적
2. 철근의 고온 노출 시 특성
3. 실험재료 및 실험방법
3.1. 철근
3.2. 화재 온도 곡선
3.3. 내화로
3.4. 인장강도 및 변형률 실험
4. 실험 결과 및 분석
4.1. 변수별 응력변형률 곡선
4.2. 변수별 연신율 거동
5. 결론
감사의 글
REFERENCES
영어 초록
PURPOSES : When fire event occurs in tunnel the reinforced concrete is exposed to very high temperature at a very short time period. This study investigates the tensile behavior of steel rebar that experienced high temperature.
METHODS : The steel rebar was exposed to 200, 400, 600, and 800℃ following the ISO 834 temperature-time fire curve. Hightemperature- exposed steel rebars were tested using the UTM for their yielding and tensile strengths, and elongation rate.
RESULTS : Up to an exposure temperature of 600℃, the tensile properties of the rebar did not vary considerably. However, at 800℃ (which corresponds to a temperature rise time of approximately 22 min), the rebar lost its yielding and tensile strength by approximately 27 and 13%, respectively, compared to the control specimen. Further, the elongation rate increased after exposure to 600℃. The above fundamental tensile test results can be a good reference for future guidelines in the repair manual for tunnels after severe fire events.
CONCLUSIONS : When steel rebar experiences high temperatures of 800℃, the yield strength of the rebar reduces approximately 27%. This strength reduction can cause severe structural damage to tunnels that use reinforced concrete as the primary structural elements.
참고 자료
없음
"한국도로학회논문집"의 다른 논문
더보기 (2/7)