분무열분해 공정에 의한 주석산화물 나노분체 제조에 미치공기압력의 영향
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국재료학회
ㆍ수록지정보 : 한국재료학회지 / 21권 / 12호
ㆍ저자명 : 유재근, 김동희
ㆍ저자명 : 유재근, 김동희
영어 초록
In this study, nano-sized tin oxide powder with an average particle size of below 50 nm is prepared by the spray pyrolysis process. The influence of air pressure on the properties of the generated powder is examined. Along with the rise of air pressure from 0.1kg/cm2 to 3kg/cm2, the average size of the droplet-shaped particles decreases, while the particle size distribution becomes more regular. When the air pressure increases from 0.1kg/cm2 to 1kg/cm2, the average size of the dropletshaped particles, which is around 30-50 nm, shows hardly any change. When the air pressure increases up to 3kg/cm2, the average size of the droplet-shaped particles decreases to 30 nm. For the independent generated particles, when the air pressure is at 0.1kg/cm2, the average particle size is approximately 100 nm; when the air pressure increases up to 0.5kg/m2, the average particle size becomes more than 100 nm, and the surface structure becomes more compact; when the air pressure increases up to 1kg/cm2, the surface structure is almost the same as in the case of 0.5kg/cm2, and the average particle size is around 80- 100 nm; when the air pressure increases up to 3kg/cm2, the surface structure becomes incompact compared to the cases of other air pressures, and the average particle size is around 80-100 nm. Along with the rise of air pressure from 0.1kg/cm2 to 0.5kg/cm2, the XRD peak intensity slightly decreases, and the specific surface area increases. When the air pressure increases up to 1kg/cm2 and 3kg/cm2, the XRD peak intensity increases, while the specific surface area also increases.참고 자료
없음"한국재료학회지"의 다른 논문
- Effects of Sputter Parameters on Electrochromic Propert..5페이지
- 2차원 Bravais Lattice를 가지는 나노 패턴 제조 및 광결정 효과를 가지는 ZnO 나노 ..6페이지
- 친환경 재료를 사용한 흑색 지르코니아 세라믹스 제조5페이지
- 클링커 제조 조건에 따른 수용성 6가 크롬 용출 특성6페이지
- 솔더 스크랩의 재생을 위한 전처리 공정6페이지
- 양면동시증착 열선-CVD를 이용한 a-Si:H/c-Si 이종접합 태양전지 제조7페이지
- 수열합성법을 이용하여 우선 배향된 ZnO 나노와이어 성장 및 발광 특성6페이지
- 반복겹침접합 압연공정에 의해 제조한 초미세립 AA1050/AA5052 복합알루미늄합금판재의 어닐링 ..5페이지
- Ball Grid Array 보드 어셈블리의 동적굽힘 신뢰성에 미치는 언더필의 영향5페이지
- Eu3+-doped A3Al1-zInzO4F (A = Ca, Sr, Ba, z = 0, 0.1)의 ..6페이지