열간 금형강의 기계적 성질에 미치는 진공열처리와 염욕열처리 조건의 영향
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2014.04
- 8페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국기계기술학회
ㆍ수록지정보 : 한국기계기술학회지 / 16권 / 2호
ㆍ저자명 : 김제돈, 박기호
목차
Abstract
1. 서론
2. 실험방법
2.1 시험편제작
2.2 기계적 성질
2.3 열처리실험
2.3 진공열처리조건
2.4 염욕열처리조건
3. 결과 및 고찰
3.1 경도에 미치는 냉각 방법의 영향
3.2 경도에 미치는 뜨임의 영향
3.3 인장강도에 미치는 냉각 방법의 영향
3.4 인장강도에 미치는 뜨임의 영향
3.5 충격인성에 미치는 냉각방법의 영향
3.6 충격인성시험에 미치는 뜨임의 영향
3.7 미세조직에 미치는 냉각방법의 영향
3.8 미세조직에 미치는 뜨임의 영향
4. 결론
References
영어 초록
Salt bath heat treatment is usually used but recently vacuum heat treatment is increased for the heat treatment of hot work die steels. The differences in two heat treatment processes were compared by testing the mechanical properties of heat treated products. With two different features of processes, mechanical properties such as hardness, tensile strength and impact strength of products show very different results. “In this study, salt bath heat treated products” showed higher tensile strength and impact strength than vacuum heat treated products but hardness was not much different. These lower mechanical properties of vacuum heat treated products are due to differences in heating and quenching process
참고 자료
없음
"한국기계기술학회지"의 다른 논문
더보기 (5/10)