기계공작법 2(조성산) 레포트 3
- 최초 등록일
- 2008.03.30
- 최종 저작일
- 2007.12
- 2페이지/ 한컴오피스
- 가격 2,000원
소개글
기계공작법2 레포트입니다.시험에 꼭 한문제 이상은 나오니...
시험보기 전에 레포트를 미리 보는것은 필수 입니다.
보시고 많은 도움되셨으면 좋겠습니다.
목차
1. What are the advantages of chemical blanking over regular blanking using punch and die method?
2. Would electrochemical grinding be a suitable process for sharpening ceramic tools? Why ot Why not? What about using ultrasonics?
3. What effect would increasing the voltage have on the metal removal rate in EDM? Why?
4. What limits the resolution of a stylus-type surface-measuring device in finding profile?
5. Why are air gages particularly well suited for gaging the diameter of a hole?
6. What are the chief disadvantages of using a vision system for measurement compared to laser scanning?
7. How is electropolishing different from electroplating?
본문내용
1. What are the advantages of chemical blanking over regular blanking using punch and die method?
chemical blanking이 regular blanking보다 좋은점은 일단 부식액을 사용하므로 공구를 이용하여 소재를 소성변형시켜 절단하는 일반적인 blanking 방법보다 힘이 적게 들고 열변형이 적게 일어나게 되며 그로인한 소재의 잔류응력도 일반적인 blanking 방법보다 적다는 것이 장점이다.
2. Would electrochemical grinding be a suitable process for sharpening ceramic tools? Why ot Why not? What about using ultrasonics?
일반적으로 ceramic은 화학적으로 안정성이 있는 단단한 부도체이다. 따라서 electrochemical grinding 방법으로는 재료가 쉽게 grinding 되지 못한다. 반면 ultrasonics 방식은 공구와 가공물 사이에서 연삭입자가 가공물 표면에 반복적으로 충돌하고 그로인해 가공물에 lateral crack이 발생하면서 떨어져 나간다. 이를 통해 고경도 취성 재료인 ceramic으로 만들어진 tool도 가공이 가능하다. 따라서 electrochemical grinding 방법보다는 초음파를 사용하는 ultrasonics 방법으로 ceramic 공구를 sharpening하는 것이 더욱 바람직 하다.
3. What effect would increasing the voltage have on the metal removal rate in EDM? Why?
EDM에서 전압을 증가시키게 되면 MRR이 커지게 되어 표면거칠기가 나빠지게 된다. 왜냐하면 공구와 가공물사이에 큰 전압을 걸어주게 되면 단위시간당 생기는 (+)와 (-)전자가 더 많이 생기게 되고 중성자와 충돌이 더 잦아지게 되어 전기가 서서히 흐르게 되는데 이때 저항열이 발생하고 온도가 올라가게 된다.
참고 자료
없음