변형률 속도에 따른 탄소강의 재결정 거동에 미치는 미량 합금 원소의 영향
(주)코리아스칼라
- 최초 등록일
- 2016.12.02
- 최종 저작일
- 2016.10
- 7페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국재료학회
ㆍ수록지정보 : 한국재료학회지 / 26권 / 10호
ㆍ저자명 : 이상인, 임현석, 황병철
목차
1. 서 론
2. 실험 방법
3. 결과 및 고찰
3.1 미량 합금 원소 첨가에 의한 초기 오스테나이트결정립 크기 변화
3.2 미량 합금 원소 및 변형률 속도에 따른 유동 응력 곡선 변화
3.3 미량 합금 원소 및 변형률 속도에 따른 미세조직 변화
4. 결 론
References
영어 초록
The present study deals with the effects of micro-alloying elements such as Ni, V, and Ti on the recrystallization behavior of carbon steels at different strain rates. Eight steel specimens were fabricated by varying the chemical composition and reheating temperature; then, a high-temperature compressive deformation test was conducted in order to investigate the relationship of the microstructure and the recrystallization behavior. The specimens containing micro-alloying elements had smaller prior austenite grain sizes than those of the other specimens, presumably due to the pinning effect of the formation of carbonitrides and AlN precipitates at the austenite grain boundaries. The high-temperature compressive deformation test results indicate that dynamic recrystallization behavior was suppressed in the specimens with micro-alloying elements, particularly at increased strain rate, because of the pinning effect of precipitates, grain boundary dragging and lattice misfit effects of solute atoms, although the strength increased with increasing strain rate.
참고 자료
없음
"한국재료학회지"의 다른 논문
더보기 (4/9)