tests and microstructural analyses including TEM analyses with EDX of precipitates in modified 9Cr-1Mo ... Mod. 9Cr-1Mo steel specimens at austenite temperature were quenched to the molten salt baths at 760˚C ... isothermal heattreatment at 760 and 700˚C for about 1 hr induces temporal embrittlement in Mod. 9Cr-1Mo
For Na doping, an NaF interlayer was deposited on Mo/glass substrate. ... cells, Na is doped into a Cu(In,Ga)Se2 light-absorbing layer from sodalime-glass substrate through Mo
and mechanical properties after plastic deformation and heat treatment in boron-modified Ti-2Al-9.2Mo ... titanium alloys were developed to take economic advantage of the use of low-cost beta stabilizers such as Mo
In recent years, industrial demands for superior mechanical properties of powder metallurgy steel components with low cost are rapidly growing. Sinte..
MO-CVD 공정 [ Mater Organic Chemical Vapor Deposition] Deposition CVD MOCVD HT-CVD MT-CVD LT-CVD 저압 CVD ... Metal Organic Chemical Vapor Deposition 기본적으로는 CVD 공정이며, CVD에 의한 박막 성장 시 Precursor로써 MO-source를 중심으로 ... 반응으로 인한 분해 LPMOVPE system에 사용 (C2H5)3Ga TEGa 액상, 높은 증기압 (CH3)3Ga TMGa 단 점 장 점 Symbol Precursor Group Ⅲ MO
10%C-5%Mo-5%W-10%Cr 및 10%C-5%Mo-5%W-10%V 백주철의 응고거동을 열분석을 통하여 연구하였다. 15Kg 용량의 고주파 유도옹해로에 선철, 고철, Fe-Mo ... -5%W-10%Cr 백주철의 경우 초정 오스테나이트, 오스테나이트와 M(sub)7C(sob)3의 공정, 오스테나이트와 M(sub)6C의 공정으로, 10%C-5%Mo-5%W-10%V ... 채취한 뒤 알루미나 도가니에 넣어 재용해시킨 후 10˚C/min의 냉각속도로 냉각시키면서 여섯 종류의 다른 온도에서 도중에 급냉시켜 응고조직을 광학현미경으로 관찰하였다. 10%C-5%Mo
Most oxide particles in Ni-22Cr-18Fe-9Mo base ODS alloy were found to be Y-Ti-O type. ... Elemental powders with the composition of Ni-22Cr-18Fe-9Mo were mechanically alloyed(M.A.) with 0.6 wt
응력 해석 결과로부터, Mo 중간재를 사용할 경우 최대 잔류 주응력이 형성되는 위치가 AlN/삽입금속 계면으로부터 삽임금속/Mo 계면을 통하여 Mo 내부로 이동됨을 확인하였다.접합체의 ... 자유표면에 형성되는 인장성분의 응력집중 위치는 Mo 중간재 두께가 증가됨에 따라 Cu/Mo 계면과 Mo/AlN 계면의 두 곳으로 분리되었으며, AlN측 잔류응력의 크기는 크게 감소하였다 ... 활성금속브레이징법으로 계면접합된 AlN/Cu 접합체의 잔류응력 완화에 미치는 Mo 중간재의 영향을 조사하였다.
In addition, the phase transformation of W and Mo nanopowders under oxidation in air was investigated ... A chemical process is suggested for the oxidation of W and Mo nano-particles after a comprehensive testing
이는 Sn과 Mo의 첨가가 보자력을 크게 증가시켰기 때문이다. ... (NdㆍDy)-(FeㆍCoㆍAIㆍM)-B 합금에 Sn,Mo등을 첨가하여 그에 따른 미세구조와 열적안정성 및 자기적 특성 변화를 조사하였다. ... 또한 Sn과 Mo 첨가원소는 irreversible loss를 각각 4%와 6% 감소시켜 리본자석의 열적안정성을 향상시켰다.
The sol-gel technique has been studied to fabricate a homogeneous Fe-Mo/MgO catalyst. ... thermal decomposition of the citrate precursor have been systematically investigated to fabricate an Fe-Mo ... with uniform diameters were achieved on a large scale by catalytic decomposition of methane over Fe-Mo
%Mo-(10 wt.%CPP) composites with bio-attractive elements for increasing strength. ... The effects of CPP content on the physical and mechanical properties of the sintered Ti-Nb-Zr-Mo-CPP ... The biocompatibility and corrosion resistance of the Ti-Nb-Zr-Mo alloys were improved by the addition