Mo-1.14at% Hf-1.00at % C 조성의 시편을 열처리한 결과 1300˚C에서 결정립내의 편상의 β-Mo 탄화물(molybdenum carbide)이 열역학적으로 더욱 안정한 ... 플라즈마 아크 용해에 의해 0.31-1.14at%Hf과 0.08-1.00at%C의 조성을 갖는 Mo시편을 제조하여, 열처리에 따른 미세조직 변화를 광학현미경, AES(Auger Electron ... α-Mo 탄화물로 변태되기 시작하고, 1400-1500˚C온도 구간에서는 급내에 의해 고용되어 있던 Hf과 C이 반응하여 미량의 Hf탄화물이 석출되었으며, 1500˚C에서는 결정립계에
다합금계백주철의 성분원소인 Cr, V, Mo 및 W 의 첨가량을 변화시켜 응고조직을 관찰하였다. ... pealite 또는 (pearlite + austenite)의 혼합조직으로 구성되어 있었으며, 또한 EPMA 분석결과 MC탄화물은 V, M7C3 탄화물은 Cr 그리고 M2C탄화물은 Mo
However, an amorphous phase was clearly formed when the Mo content was lowered to x=10. ... In the case of x=35, where pure Cu powders were mixed with equal amount of pure Ta and Mo powders, we
A solid-solution nanocrystalline powder, (Ti,Mo)C, was prepared via high-energy milling of Ti-Mo alloys ... The average grain size of the (Ti,Mo)C was lower than 150 nm. ... The hardness and fracture toughness of the dense (Ti,Mo)C produced by PCAS were also evaluated.
Co 및 Mo 촉매 농도별 PP 전환율 및 열분해 생성물 수율은 Co:Mo=50:50 혼합시 가장 우수한 것으로 나타났다. ... 그리고 450℃ 반응온도에서 촉매 사용에 따른 전환율은 모든 반응시간에 있어 Mo 촉매 > Co 촉매 > 무촉매 순이었다. ... 본 연구는 폴리프로필렌(PP) 수지의 Co 및 Mo 촉매에 의한 반응시간과 농도변화에 따른 저온열분해 액화특성을 파악하고자 회분식 반응기를 이용하여 특정 온도(425, 450, 475
The effect of particle size distribution on green and sintered properties of Fe-Cr-Mo prealloy powder ... For the study, prealloyed Fe-Cr-Mo powders with different particle sizes were mixed as various ratios
The high temperature deformation behavior of Ni3Al and Ni3(Al,Mo) single crystals that were oriented ... The values of the activation energy are 360 kJ/mol for Ni3Al and 300 kJ/mol for Ni3(Al,Mo). ... Activation energies for deformation in Ni3Al and Ni3(Al,Mo) were obtained in the low strain rate region
Then, a Mo layer, with a thickness of 20 nm, was deposited on the PVA mold. ... The Mo deposited PVA mold was put on the Si wafer substrate, and nTP process progressed. ... After the nTP process, the PVA mold was removed using DI water, and transferred Mo nano patterns were