중저준위 방폐물 처분 사일로 구조물의 구조거동 수치해석 연구
(주)코리아스칼라
- 최초 등록일
- 2023.04.10
- 최종 저작일
- 2022.06
- 8페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 35권 / 3호
ㆍ저자명 : 김선훈, 김광진
목차
Abstract
1. 서 론
2. 중저준위 방폐물 동굴처분시설 개요
2.1 사일로 구조물
2.2 지반체 및 재료 특성값
3. 지반체의 구성모델 및 철근콘크리트 유한요소
3.1 지반체의 구성 모델
3.2 철근콘크리트 라이너의 유한요소
4. 유한요소해석
4.1 해석영역 및 유한요소망
4.2 사일로 구조물의 건설과정
4.3 2-D 축대칭 모델 및 3차원 모델
5. 해석결과
5.1 쇼크리트 해석결과
5.2 잔류수압을 받는 라이닝 해석결과
5. 결 론
감사의 글
References
요 지
한국어 초록
경주 방폐물 처분시설의 1단계 시설로 건설된 지하 사일로 구조는 2014년에 10만 드럼 규모로 완공되어 현재 운영중에 있다. 지하 사일로 구조는 지름 25m, 높이 50m로써 방폐물을 저장하는 실린더부분과 돔 부분으로 구성되어 있으며, 돔부분은 운영터널과 연결 되는 하부 돔 부분과 상부 돔 부분으로 구분할 수 있다. 지하 사일로 구조의 벽체는 철근콘크리트 라이너이고, 두께는 약 1m이다. 본 논문에서는 지하 사일로 구조의 건설과정 및 운영과정의 단계별 유한요소해석을 수행하였다. SMAP-3D 프로그램을 사용하여 2차원 축대칭 유한요소해석을 수행하였다. 2차원 축대칭 유한요소모델의 신뢰성을 검토하고자 3차원 유한요소해석도 수행하였다. 본 논문 에서는 지하 사일로 구조의 구조거동을 분석하고 구조적 안전성을 검토결과를 제시하였다.
영어 초록
The construction of an underground silo structure was the first stage of erecting the Gyeongju low-and-intermediate-level radioactive waste disposal facility. The facility, completed in 2014, has a scale of 100 000 drums and is currently in operation. The underground silo structure, 25 and 50 m in diameter and height, respectively, consists of cylindrical (for storing waste packages) and dome parts. The dome is divided into lower (connected to the operation tunnel) and upper parts. The wall of the underground silo structure is an approximately 1-m-thick reinforced concrete liner. In this study, finite element analysis was performed for each phase of the construction sequence and operation of the underground silo structure. Two-dimensional axial symmetric finite element analysis was implemented using the SMAP-3D program. Three-dimensional finite element analysis was also performed to examine the reliability of the two-dimensional axial symmetric finite element model. The structural behavior of the underground silo structure was predicted, and its structural safety was examined.
참고 자료
없음
"한국전산구조공학회 논문집"의 다른 논문
더보기 (1/6)