독본(dogbone) 내진접합부를 갖는 철골 모멘트골조의 횡강성 평가
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 15권 / 4호
ㆍ저자명 : 이철호
ㆍ저자명 : 이철호
한국어 초록
본 연구에서는 원주형 절취 독본(dogbonc) 내진 접합부 도입에 따른 철골모멘트골조의 횡강성 감소 정도를 용이하게 산정할 수 있는 실용적 해석기법을 제안하였다. 된 연구의 방안은 원래의 원주형 절취 형상의 독본에서 발생하는 신장량과 동일한 크기의 신장량이 유발되도록 등가의 균등한 유효폭을 갖는 독본 형상으로 치환하는 것에 근거하고 있다. 등가 유효폭을 도입하는 목적은 공액보법을 적용하여 보의 휨변형에 의한 골조의 횡변위 성분을 유도할 때 수행되는 전분을 해석적으로 하기 위함이다. 이러한 접근법의 타당성을 먼저 검증된 유한요소해석모델에 의해 확인한 후, 기둥, 패널존 그리고 보의 변형에서 기인하는 골조의 횡변위 성분을 독본의 존재를 고려하여 해석적으로 유도하였다. 이 유도결과를 이용한 사례분석에 의할 때, 독본의 도입에 따른 횡변위 증가율은 2%3%(횡강성 감소율로는 1%2%) 정도로서 실무적으로 무시할 수 있는 크기로 나타났다.영어 초록
A simplified analytical procedure is presented to estimate the reduction of elastic lateral stiffness of steel moment frames arising from the radius-cut dogbone weakening. With the original radius-cut dogbone shape, it is almost impossible or too complicated to integrate analytically the mathematical expressions encountered when applying the conjugate beam method to compute the beam deflection component. In this study, the problem is circumvented by replacing the original radius-cut dogbone with an equivalent dogbone of constant width. The equivalence between the two is established by imposing an equal dogbone elongation criterion. This approach is justified by using a calibrated finite clement analysis. Then, the elastic lateral deflection components from the column, panel zone, and beam are derived for a typical beam-column subassembly. The derived results can be used to evaluate the reduction of the frame lateral stiffness. Case studies conducted within some practical ranges of frame configurations show that the reduction in frame lateral stiffness due to the presence of dogbone cut is on the order of 1 to 2 percent and is reasonably negligible in practical sense.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
- 자기장과 온도장으로 재하된 강자성 판의 좌굴13페이지
- 케이블 처짐 형상 결정을 위한 반복 계산법의 개발11페이지
- 오차분석을 통한 개선된 EFG 균열해석기법의 해석계수 영향평가11페이지
- 검증된 고속철도 차량의 20량편성 정밀모형에 의한 철도교량의 동적응답 분석10페이지
- Navier-Stokes 유체의 최적제어를 위한 SQP 기법의 개발17페이지
- Navier-Stokes 유체의 최적 제어14페이지
- 용접부 3차원 반타원 계면균열선단에서의 응력장11페이지
- 미분구적법(DQM)을 이용한 탄성지반 위에 놓인 변단면 압축부재의 자유진동 해석10페이지
- 수평으로 놓인 배플형 연료탱크의 슬로싱 고유거동에 관한 유한요소 해석10페이지
- 두꺼운 원형링의 3차원적 자유진동해석9페이지