Manufacture of the vol-oxidizer with a capacity of 20 kg HM/batch in UO2 pellets using a design model
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국방사성폐기물학회
ㆍ수록지정보 : 방사성폐기물학회지 / 4권 / 3호
ㆍ저자명 : Young-Hwan Kim, Ji-Sup Yoon, Jae_Hoo Jung, Dong-Hee Hong, Jae-Beop Uhm
ㆍ저자명 : Young-Hwan Kim, Ji-Sup Yoon, Jae_Hoo Jung, Dong-Hee Hong, Jae-Beop Uhm
목차
Abstract 요약 I. 서론 II. 연구결과 및 논의 가. 3단 메시 형 기존 분말화 장치의 실험 및 결과 나. UO₂펠릿 20kg HM/batch의 실증용 분말화 장치 개발 III. 결론 참고문헌한국어 초록
[ ] 펠릿 20 kg HM/batch용 분말화 장치는 차세대관리 공정의 금속전환로 안으로 균질화된 분말을 공급하기 위하여 펠릿을 산화하여 으로 분말화하는 장치이다. 본 연구에는 펠릿 20 kg HM/batch용 분말화 장치 설계모델을 제시하고, 실증용 분말화 장치를 제작하여 검증실험을 수행한다. 분말화 장치 설계모델은 내부구조, 성능, 가열로 위치와 크기 등이 고려된다. 실험 방법은 펠릿 20 kg HM/batch용 분말화 장치 설계 모델에 따라 기존의 3단 메시 분말화 장치를 이용하여 분말의 메시 투과시험과 온도변화 특성 실험을 하여 장치 내부구조를 결정한다. 펠릿 20 kg HM/batch의 산화 반응도 실험과 가열로 위치별 온도 분포를 측정하고 장치의 성능과 가열로의 영 역 위치를 결정한다. 장치 크기를 결정하기 위하여 산화전의 20kg의 펠릿과 산화후의 부피를 측정한다. 이상의 결과를 토대로 실증용 분말화 장치를 설계. 제작하고, 검증을 위하여 산화도, 분말특성 및 분석 등을 수행하였다. 산화반응 실험결과 에서 기존장치에 비하여 분말의 메시 투과율이 향상되었으며, 기존의 3단 메시 장치의 펠릿산화시간이 13시간 소요된 것에 비하여 8시간으로 단축되었다. 분말 특성 분석결과, 평균 입도가 이었다. 제작된 펠릿 20 kg HM/batch용 분말화 장치 성능과 설계모델 예측 값은 대체로 잘 일치되었다.영어 초록
Vol-oxidizer is a device to convert pellets into powder and to feed a homogeneous powder into a Metal Conversion Reactor in the ACP(Advanced Spent Fuel Conditioning Process). In this paper, we propose a design model of the vol-oxidizer, develop the new vol-oxidizer with a capacity of 20 kg HM/batch in pellets, and conduct a verification for the device. Design considerations include the internal structure, the capacity, the heating position of the device, and the size. The dimensions of the new vol-oxidizer are decided by the design model. We determine a permeability test of the measuring the temperature distribution, and the volume of and . We manufactured the new vol-oxidizer for a 20 kg HM/batch in pellets, and then analyzed the characteristics of the powder for the verification. The experimental results show that the permeability of the throughout mesh enhance more than old vol-oxidizer, the oxidation time takes only 8 hours when compared with the 13 hours of the old device, and the average distribution of particle size is . The capacities of new vol-oxidizer for a 20 kg HM/batch in pellets were agree well with the predictions of design model.참고 자료
없음태그
"방사성폐기물학회지"의 다른 논문
- Structural Analysis of the Canister for PWR Spent Fuels..9페이지
- National Policy and Status on Management of Spent Nucle..15페이지
- Comparison of the Correction Methods for Gamma Ray Atte..10페이지
- Development of Evaluation Modules for Evaluating Decomm..9페이지
- The Test for Verifying a Tip-Over Analysis of a Dry Sto..9페이지
- An Experimental Study on the Sorption of Uranium(VI) on..9페이지
- Evaluation of Chemical Durability of Vitrified Forms fo..8페이지
- The Development and Performance Evaluation of a Cyclone..10페이지
- A Study on the Wigner Energy Release Characteristics of..8페이지
- 한국방사성폐기물학회지 논문 투고요령3페이지