주조용 이상스테인리스강에서 응고속도 및 질소고용도에 따른 오스테나이트 석출 거동
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2007.12
- 6페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국재료학회
ㆍ수록지정보 : 한국재료학회지 / 17권 / 12호
ㆍ저자명 : 이종엽, 이재현, 김상식, 최병학, 김성준, 손희영
영어 초록
Austenite precipitation behavior was studied with solidification rates and alloying contents, N and Cr, in duplex stainless steels by directional solidification. Directional solidification experiments were carried out with solidification rates, 1~100mm/s, and N and Cr contents, 0~0.27wt.%, 25~28wt.% respectively, in a duplex stainless steel, CD4MCU. As the solidification rate increases, the dendrite spacing reduced and the austenite phase in the ferrite matrix became finer. The volume fraction of austenite phase increased and its shape went to be round with increasing nitrogen contents in duplex stainless alloys. The Cr alloying element, even though it is a ferrite former, showed to enhance the nitrogen solubility in the alloy and caused the austenite round and finer. Also, Cr was supposed to decrease the austenite volume fraction, but it increased the austenite slightly due to increasing nitrogen solubility during solidification.
참고 자료
없음
"한국재료학회지"의 다른 논문
더보기 (4/9)