유동층 반응기에서 합성가스 생성에 미치는 반응온도와 반응물 유속의 영향
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2004.09
- 6페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국유화학회
ㆍ수록지정보 : 韓國油化學會誌 / 21권 / 3호
ㆍ저자명 : 김상범, 김영국, 황재영, 김명수, 박홍수, 함현식
영어 초록
Synthesis gas is a high valued compound as a basic chemicals at various chemical processes. Synthesis gas is mainly produced commercially by a steam reforming process. However, the process is highly endothermic so that the process is very energy-consuming process. Thus, this study was carried out to produce synthesis gas by the partial oxidation of methane to decrease the energy cost. The effects of reaction temperature and flow rate of reactants on the methane conversion, product selectivity, product ratio, and carbon deposition were investigated with 13wt% Ni/MgO catalyst in a fluidized bed reactor. With the fluidized bed reactor, CH4 conversion was 91%, and Hz and CO selectivities were both 98% at 850℃ and total flow rate of 100 mL/min. These values were higher than those of fixed bed reactor. From this result, we found that with the use of the fluidized bed reactor it was possible to avoid the disadvantage of fixed bed reactor (explosion) and increase the productivity of synthesis gas.
참고 자료
없음
"韓國油化學會誌"의 다른 논문
더보기 (4/9)