PEMFC 지지체용 PVdF/Laponite 강화 복합막의 특성평가
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2010.06
- 10페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국막학회
ㆍ수록지정보 : 멤브레인 / 20권 / 2호
ㆍ저자명 : 오슬기, 황해영, 김형준, 남상용
한국어 초록
본 연구에서는 연료전지용 강화 복합막 지지체 제조를 위해 높은 다공성을 가지는 PVdF 평막을 제조하였다. 높은 다공도로 인한 낮은 기계적 강도를 보완하기 위한 방법으로 나노 사이즈의 laponite를 막 내에 분산시켰다. 제조된 PVdF/Laponite 복합막의 모폴로지 및 다공도는 SEM 분석 및 무게 중량법을 사용하여 평가하였고, 60% 이상의 다공도를 보였다. 첨가된 laponite 함량에 따른 막의 열적 안정성은 105℃, 135℃에서의 수축률을 이용하여 평가하였으며, laponite 함량이 5%일 때 135℃에서 MD와 TD방향으로의 열 수축률 2~3%와 2~3.5%를 나타내었다. Laponite 첨가 후 막의 기계적 강도가 향상되었으며, 순수 PVdF 막에 비해 약 30%의 모듈러스 증가를 나타내었다.
영어 초록
In this study, high porous PVdF flat sheet membranes were prepared to obtain reinforced membrane support for polymer electrolyte membrane fuel cell. Nano-size laponite was randomly dispersed in the membranes to improve mechanical property which lowered by the high porosity. The morphology and porosity of prepared PVdF/Laponite composite membranes were examined using the SEM analysis and the weight method and all membranes showed over 60% porosity. The membrane thermal stability depending on the laponite contents in the composite membranes was evaluated by membrane heat shrinkage at 105℃ and 135℃. MD and TD heat shrinkage of the PVdF composite membrane containing 5 wt% laponite was 2~3% and 2~3.5% at 135℃, respectively. The mechanical strength was enhanced after incorporating laponite particles and 30% increase in the modulus compared to pure PVdF membrane was obtained.
참고 자료
없음