The interfacial area density and inertial resistance of filler material are selected as simulation parameters ... density increases from 800 to 4000 1/m, the discrepancy of the temperature distributions between the filler
The compressive strength of the geopolymeric ceramic depended on the added active filler content. ... the higher compressive strength of geopolymeric ceramic material increased with an increase in active filler ... amounts of heavy metals were noticeably reduced after the solidification of mine residue with active filler
The electrical conductivitiesalso increased with increasing content of nanotube filler. ... The electrical conductivities
also increased with increasing content of nanotube filler. ... As theconcentrations of nanotubes filler were increased in the composite specimens, their storageand
Carbon nanotubes, consisting of rolled graphene layer built from sp2 units, have attracted the imagination of scientists asideal macromolecules and th..
The most important filler characteristics are particle size, size distribution, specific surface area ... discuss the aspects of the mechanical, electrical and thermal properties of composites with different fillers ... contain various carbon materials in carbon black-based and silica based-SBR matrixes with dual phase fillers
and the TiO2 is representative of infrared reflective fillers. ... the hollow silica sample was measured and compared with those values of other commercial insulating fillers ... applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers
The graphite nanosheets (GNs) and multi-walled carbon nanotubes (MWNTs) were used as co-carbon fillers ... In this work, the effect of co-carbon fillers on the electrical and mechanical properties of epoxy nanocomposites
The mechanical properties of composites increased progressively with the decrease of filler loading. ... crosslinking agent (sodium benzonate) were used in order to improve the bonding force between matrix and fillers
Various inorganic fillers improve the thermal conductivity and physical properties of organic products ... Alumina has been used a representative filler in the heat radiation sheet for the heat radiation of electric
Heating time, heating temperature and filler content had significant effects on the activity of each ... In this study, the effects of heating temperature, heating time, and filler content during the dewatering ... total of 45 experimental runs, consisting of three variables (heating time, heating temperature, and filler
Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler,for example ... The criticalamount of the electrically conductive filler necessary to build up a continuous conductivenetwork ... Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler,
for example
frequently applied to describe the insulator-to-conductor transitions in composites made of a conductive filler ... experimentally and theoretically that the percolation threshold strongly depends on the aspect ratio of filler
It was found that the percolation threshold strongly depends on the aspect ratio of filler particles. ... applied to describe the insulator-to-conductor transitions in the composites composed of conductive filler
The surface treatment effects of reinforcement filler were investigated based on the dynamic mechanical ... storage modulus of MWCNTs/epoxy composite was enhanced about 1.27 times through oxyfluorination of MWCNTs fillers
The mixtures of preceramic polymer and filler materials, such as SiC, Si and MoSi, were used as a paste ... strength of the joints was 63 MPa for the specimen joined with 10 vol.% of and 30 vol.% of SiC as filler
In this work, the effect of co-carbon fillers on the electrical and mechanical properties of epoxy nanocomposites ... The graphite nanosheets (GNs) and multi-walled carbon nanotubes (MWNTs) were used as co-carbon fillers.The ... The graphite nanosheets (GNs) and multi-walled carbon nanotubes (MWNTs) were used as co-carbon fillers.The
As a result, carbon filler content of Samples A and B accounted for 73.93 and 61.46%, respectively. ... Sample B included 10% more inorganic filler(Al, Mg, Si, Ca), and its thermal conductivity was 10.9 W/