[Reynolds Number] 결과레포트/성균관대학교

소개글

레이놀즈수 실험을 한 후 작성한 결과레포트입니다.

목차

[Lab 1] Reynolds Number
1. Title
2. Objective
3. Result
4. Discussion
5. Factors of error
6. Summary

본문내용

1. Title
Reynolds Number

2. Objective
This experiment is designed to investigate the relationship between fluid velocity and flow conditions to understand the role of “Reynolds Number” in fluid mechanics.

3. Result
I complete the Result sheet by the following procedure.
Temperature: 16℃
Diameter d: 2cm = 0.02m
Cross-sectional area(m2) = pi*d2/4 (m2) = pi*10-4 (m2)
Flow rate (m3/sec) = Change volume (ml) unit to m3, and divide time => volume×10-6/time (m3/sec)

< 중 략 >

5. Factors of error
B. Human error
Many of the procedure should be proceeded by eye of human. It may be very small, but human error might have occurred when measuring the volume, time and flow.
In laminar flow, the flow of ink is clearly straight, and in turbulent flow, the flow of ink is clearly spread out. Therefore, it is easy to determine the time when to measure the volume because the two flows have a clear change even when judged by the eye, and the experimental value of the Reynolds number actually falls within the theoretical range.

참고 자료

‘Chemical Engineering Laboratory 2’, Sungkyunkwan University School of Chemical Engineering, 2021, p8~14
Fluid Mechanics for Chemical Engineers 3rd Edition, James O. Wilkes, 2020, p126~130
Fluid Mechanics for Chemical Engineers 2nd Edition, Noel de Nevers, 1991, p180~192
Physical Chemistry 10th edition, Peter Atkins Julio de Paula, p791
Pre-lab report of experiment 1