alloy and Al-12Sialloy powders. ... to below 4.5 wt%, which can sufficiently suppress the grain boundary segregation of the α- Si precipitates ... Aluminum alloys, known for their high strength-to-weight ratios and impressive electrical and thermal
Al-Si합금의 용탕처리 1. 실험 목적 가. ... 후 그 조직을 관 찰하고 D.I값을 측정하여 비교해본다. 2) Al-Si합금 용탕을 아무것도 첨가 하지 않은 것, Al-Sr 100ppm만큼 첨가한 것, Al-Sr 200ppm만큼 ... 첨가되어 공정 Si조직을 개량 처리 할 것이고, Ti-B는 첨가되어 초정 Al을 미세화 시키는 역할을 할 것이다. 4.
The addition of TiB in the Al-12%Sialloy reduced the size of the primary α-Al and eutectic Si phases ... Al-12%Sialloys were prepared by die casting at 660 oC. ... The eutectic temperature of the Sr-modified Al-12%Sialloy decreased to 9 oC and the mushy zone region
Al-Si합금은 Si plate가 다각형의 길쭉한 판상으로 존재하게 되는 전기로에 12kg의 Al-Si합금을 용해 한다.용탕 온도(770°C), 용탕 분위기 온도(760°C)(용해 ... 실험 배경 Al-Si 합금은 4OOO 계 알루미늄 합금 으로써 비열처리 합금이며 주로 용접용 재료로 쓰인다. ... 실험 요약 본 실험은 Al-Si 합금의 주조와 이 합금의 개질화 처리를 통해서 기공의 변화, Si plate가 합금 내에서 어떻게 변하는가를 알아 보기 위한 실험이다.
As a result, the etched porous powder shows better electrochemical properties than as-milled Si-Ge-Al ... In order to solve these problems, Si-Ge-Alalloys with porous structure are designed as anode alloy powders ... are etched using 1 M HCl solution, which gives the powders a porous structure by removing the element Al
In this study, using PSO, we have tracked down a search space composed of Sr-Al-Si-O-N and have discovered ... The discovery of new luminescent materials for use in light-emitting diodes(LEDs) has been of great ... interest, since LED-based solid state lighting applications are attracting a lot of attention in the
than in Al-5.5Mg-2.9Sialloy. ... -2.9Si and Al-7Mg-0.9Zn alloys, were investigated in detail. ... The rolling workability was better for the Al-7Mg-0.9Zn alloy than for the Al-5.5Mg-2.9Sialloy; in case
base alloy are Al8Fe2Si and Al4.5FeSi. ... investigated the growth behavior and characteristics of compounds formed at the interface between a liquid Al-Si-Cu ... of the microstructural analysis indicate that the primary phases of the interfacial compounds in the Al-Si-Cu
In this study, Fe-Si-Al-P alloy powders were manufactured using various manufacturing process parameter ... 한국분말야금학회 한국분말야금학회지 Sung-Min Kim, Eun-Ji Cha, Do-Hun Kwon, Sung-Uk Hong, Yeon-Joo Lee, Seok-Jae Lee, Kee-Ahn ... Lee, Hwi-Jun Kim
and Al8Fe2Si phases, as in the case of the Al-Si-Mg alloys. ... In this study, the effects of adding small amounts of Cu and Zr to the Al-Si-Mg based alloy on tensile ... Although the tensile strength of the Al-Si-Mg alloy was not significantly affected by the additions of
Al-Mg-Si계 합금의 결정립 미세화 1. 실험 목적 가. Al-Mg-Si계 합금에 Zr원소를 첨가 나. ... Al-Mg-Si 합금 특징과 조직 1) 우수한 성형성과 높은 강도를 가진다. 2) 다른 알루미늄 합금에 비해 우수한 압출성, 표면처리성을 가진다. 3) 강한 가공에 견디며, 복잡한 ... 실험 고찰 Al-Mg-Si계 합금에 Zr을 각각 0.1%, 0.15%, 0.2%, 0.3% 첨가했을 때 결정립 미세화 정도를 살펴보았을 때 0.2wt% Zr에서 가장 미세화 효과가
The effect of the alloy systems Al-Mg alloy and Al-Sialloy in this study on the characteristics of ... and Al-Sialloys were found to be very similar, whereas the Al-Mg alloy had higher residual stress and ... However, there were no visible defects observed in the Al-Sialloy.
The results can be attributed to a higher degree of covalency in the Ga-O bonds than in the Al-O and ... The crystal structure and magnetic properties of a new solid solution type ferrite (Fe2O3)5-(Al2O3)3.4 ... -(Ga2O3)0.6-SiO were investigated using X-ray diffraction and Mössbauer spectroscopy.
AI-Si/SiC 복합재료 용탕을 항온으로 유지하면 입자가 없는 지역은 유지시간이 약 처음 30분 동안 빠르게 증가한다. ... AI-xSi/ySiC( x:6~18wt%, y: 3~9wt%, SiC 입자크기: 10~28μm) 복합재료를 재용해한 후 항온 유지하고 응고 시킬때 SiC 입자가 몰드의 하부로 침강하는
EDS 분석에 의하여 석출물은 Ti, Al, 그리고 Si로 이루어진 3상 화합물이라고 추정되었고, X-ray회절 분석에 의해 석출물은 Ti, Al, 그리고 Si간의 3상 화합물인 Ti7Al5Si12로 ... 이로 부터 다음과 같은 결과를 얻었다 Single-Si 기관에서 형성한 TiSi2층은 Al-1% Si 층과 550˚C에서 완전히 반응하여 석출물을 형성하였고, poly-Si 기판에서 ... 그 위에 Si이 1% 첨가된 Al-1% Si을 600nm sputter한 후 후속 열처리로서 400-600˚C 에서 30분간 N2분위기로 furnace어닐링을 실시하였다.
금속과세라믹기초설계#2 [수요일6조] Al-Si합금을 이용한 경도값 측정 및 조직사진 분석 1. 개요 이번 실험에서는 Al-Si합금을 이용하여 시료의 기계적 물성을 측정한다. ... 실험에 이용되는 합금은 Al-10%Si 아공정 합금이다. ... 조직사진에서 흰 색의 조직이 alpha-Al의 초정상이며 검정색의 조직은 Al과 Si이 층상구조를 이루고 있는 공정조직이다.
과공정 Al-18wt%Si합금의 초정 Si입자의 미세화에 미치는 첨가원소의 영향에 관하여 조사하였다. ... 초정 Si입자의 크기는 P량이 증가함에 따라 미세해졌으며 적정 P량은 40ppm이었다. ... 또한 WDS분석 결과 초정 Si내에 AIP가 핵생성 site로 존재함을 알 수 있었다. 한국재료학회 한국재료학회지 김경민, 고승운, 윤의박