The CDI (Capacitive deionization) is one of the desalination technologies that use a carbon material electrode with large surface area and excellent ..
In this study, the recovery rate of thermal desorbing (TD) method was investigated in relation to sample concentration and loading volume of reduced ..
분석법 열 탈착 분석법은 고체표면에 기체를 낮은 온도에서 흡착시킨 후 그 고체에 점진적으로 온도를 높여주었을 때 탈착하는 화학 종을 질량분석법으로 탐지하는 방법이다. ... 계의 온도가 높아 기체 분자의 운동에너지가 크면 탈착 가능성이 높아지나, 탈착의 진행 여부는 기체 분자와 표면 사이의 상호작용의 정도에 따라 달라진다. 2) 분자가 기체나 액체상에서 ... 따라서 탈착되는 분자를 관찰하면, 반응물질, 반응경로, 반응에너지 등에 대한 정보를 얻을 수 있다. => 고체 표면에 흡착된 분자의 온도에 따른 탈착 속도는 다음식으로 나타낼 수 있다
전도성 활성탄소와 폴리비닐리덴플로라이드(PVDF)를 이용하여 제조된 탄소막을 이용하여 폐수의 Total dissolved Solid (TDS)를 제거할 수 있는 탄소막 시스템을 제조하였다. 100 ppm의 NaCl, Na2SO4, MgCl2, MgSO4수용액을 이용하여..
계의 온도가 높아 기체 분자의 운동에너지가 크면 탈착 가능성이 높아지나, 탈착의 진행 여부는 기체 분자와 표면 사이의 상호작용의 정도에 따라 달라진다. 3. ... 이번 실험에서 정확한 탈착률을 계산할 수 없었지만 중금속이 흡착된 다시마를 칼슘이온으로 이온교환하면 흡착 및 탈착과정을 여러 차례 반복할 수 있을 것 같다. 6. ... 실험목적 해조류(다시마)를 이용하여 카드뮴의 흡착 및 탈착 특성을 알아본다. 2.
The adsorption/desorption characteristics of toluene vapors filled with activated carbon(AC) were studied. Adsorption performance of AC was investiga..
Volatile organic compounds (VOCs) are considered as one of the main air pollutants, and legislation has already been introduced in many countries to ..
그리고 반대로 크롬을 탈착하기 위해 흡착된 양에 따른 탈착에 필요한 CaCl _{ 2} 수용액의 양을 조사해본다. ... Cd, Pb, Zn Cu 중 Cr와 친화력이 가장 큰 물질이 흡착속도가 가장 빠르고, 탈착속도가 가장 느릴 것이다. 3. ... 요지 Summary 두 성분간의 친화력세기 PROPTO {흡착속도} over {탈착속도} 의 관계를 가질 것으로 예상된다.
Desorption reaction characteristics of the used activated carbons collected from manufacture of rubber and plastics products in Shiwha/Banwal industr..
Low temperature desorption of the used activated carbons that contain VOCs (Volatile Organic Compounds) produced from Shiwha/Banwal industrial comple..
Desorption characteristics of waste activated carbons collected from chemicals manufacturing industries in Shiwha/Banwal industrial complex were inve..
In order to accurately analyze trace-level, reduced sulfur compounds (RSC) in ambient air, one needs to rely on the thermal desorption technique (TD)..
흡착된 우라늄 이온의 탈착은 흡착제의 종류에 관계없이 약 30분 이내에 거의 100% 탈착되었다. 한국재료학회 한국재료학회지 황택성, 박정기, 홍성권, 신현택, 노영창 ... 한편 Ca, Mg 이온은 흡-탈착 cycle이 반복될수록 증가하였으며 그양은 각각 0.3, 0.9mmole/g-Ads로 우라늄 이온의 그것보다 매우 낮았다.
In this study, the removal characteristics of reduced sulfur compounds (RSC) were investigated against activated carbon (AC) by means of electric coo..