All the components is designed and formability is examined from the point of geometry and thinning. ... Overall possibility of hydro-formable side member parts could be examined by cross sectional analyses ... requires feasibility study and process design aided by CAE (computer aided design) to confirm hydro-formability
Overall possibility of hydro-formable sub-frame parts could be examined by cross sectional analyses. ... requires feasibility study and process design aided by CAE (computer aided design) to confirm hydro-formability
used in the aircraft industry owing to its excellent mechanical properties and low density, the low formability ... bed fusion (L-PBF) has become a novel process for overcoming the limitations of the alloy (i.e., low formability
Salts such as a LiCl-KCl were added as a binder for improving electrical per-formance and formability ... In this study, the effects of the addition of Li2O in LiCl-KCl binderon the formability of FeS2 powder ... The high strength of compacts by the Li2O addition and pre-heat-treatment could improvethe formability
The formability was evaluated with respect to filling density, tap density, compaction density, spring-back ... Li-Si alloy and LiCl-KCl addition as a binder phase for raw material of anode were investigated on the formability ... The increasing amount of LiCl-KCl binder phase contributed to reducing spring-back, improving the formability
The addition of PVA induced and increase in the formability of the sintered bulk. ... by magnetic pulsed compaction (MPC) and subsequent two-step sintering employed in this study and the formability
플라스틱) SEMICRYSTALLINE THERMOPLASTICS IMIDIZED MATERIALS • Soften over a wide temperature range • Good formability ... resistance • Structural applications only(not suitable for bearing and wear) • Sharp melting point • Poor formability