The intermediate shaft of sliding type is assembled with coated shaft joint and tube joint. Since the intermediate shaft plays a role of absorbing di..
2809.0g) / 4999.7g} x 100 = 43.8% ※ 판정기준 - 보조기층재료일 경우 : 마모 감량이 50% 이하이어야 한다. - 입도조정기층재료일 경우 : 마모 감량이 ... 결론 및 고찰 - 이번 실험의 실험값만 놓고 보았을 때는 이번 시험의 시료로 쓰인 굵은 골재는 마모 감량이 상대적으로 커도 되는 보조기층재료로 쓰일 때만 사용할 수 있으며, 마모 감량이 ... 또한 부순 돌, 부순 광재, 자갈 등의 마모저항성을 측정하는데 사용된다. Ⅱ.
In order to use PUR/CuO Composites as the sealing materials for ships equipment, this research has been performed. PUR/CuO composites are produced by..
Generally the side plate materials of FRP ship are composed of glass fiber and unsaturated polyester resin composites(GFRP composites). In this study..
이와 같은 마모현상은 각종 기계류가 작동할 때 여러 가지 형식으로 나타나므로 마모기구가 다양하여 마모 시험기도 여러 종류가 있다. ... 마모시험 간의 마모량에 영향을 미치는 인자에 따라 상이한 결과값을 갖기 때문에 마모시험은 항상 상대적인 평가이다. ... 이론적 배경 ⅰ) 시험기에 대한 원리 마모 시험기는 마모기구와 상대운동의 방식에 따라 여러 가지 종류가 있으며, 이번에 시험하게 될 방법은 미끄럼 마모 시험으로 다음과 같은 구조를
많은 마모 변수가 존재하지만 하중과 회전수에 따른 마모를 살펴보고 실제생활에서 적용사례를 생각해본다. ... 마모실험 보고서 실험 목적 마모(wear) : 마찰부분에서 재료가 떨어져 나가는 현상을 말하며 기계적 파괴 작용의 하나이다. ... 고찰 마모량과 마찰계수는 비례한다. 마지막 그래프를 봤을 때 마모되어 마찰계수가 감소했다.
알루미나이징강에 대하여 초기마모영역에서 rolling-sliding 마모시험을 한 결과를 요약하면 다음과 같다. 1) 2차 확산재의 내마모성이 가장 우수하고 처녀재에 비하여 저응력 ... rolling-sliding 접촉에 의한 마모파양의 형태는 spalling 이며 spalling crack은 합금속의 경계부근에서 발생한다. ... 레벨에서 약 18%, 고응력에서 약 40%의 마모감소를 나타낸다. 2) 2차 확산재는 피복층과 합금층 경계부근의 공공생성으로 인하여 예상보다 내마모성이 낮다. 3) 알루미나이징강의
The effect of load and sliding speed on abrasive wear characteristics of glass fiber/polyurethane (GF/PUR) composites were investigated at ambient te..
탄소 섬유강화 에폭시기지 복합재의 경면 가공한 스테인리스강 상대재와 마찰과 마모에 바탕을 둔 연구에서는 다음과 같은 결론을 얻었다. (1) 복합재의 비마모율은 하중이 증가하면 N방향와 ... 이것은 마모 메카니즘의 영향으로 속도가 증가하면 마모 이착막의 생성이 빨라져 이착막 속의 탄소섬유가 윤활제의 역할을 하기 때문이다. (2) 복합재의 마찰계수는 하중이 증가하면 N방향과 ... 거동에 미치는 하중의 효과는 다르며 마찰초반에 발생한 섬유에 의한 쟁기질과 섬유 굽힘 및 미소크랙에 의한 섬유 균열과 파괴에 따른 마모 메카니즘의 형태에 의한 것이다.
탄소 섬유강화 에폭시기지 복합재의 경면 가공한 스테인레스 강 상대재와 마찰과 마모에 바탕을 둔 연구에서 다음과 같은 결론을 얻었다. (1) 일방향 탄소섬유 강화 복합재의 마모 거동에 ... 미치는 미끄럼 방향의 효과는 다르며 작용하는 마모 메커니즘의 형태에 의존한다. (2) 상온에서 경면 가공한 스테인리스 스틸에 대하여 미끄럼이 일어나면 AP 방향에서 높은 마모 저항과 ... 이것은 마모 메카니즘의 영향으로 속도가 증가하면 마모 이착막의 생성이 빨라져 이착막 속의 탄소섬유가 윤활제의 역할을 하기 때문이다. (4) 복합재의 마찰계수는 미끄럼 속도가 증가하면
The behavior of abrasive wear on counterpart roughness of glass fiber reinforcement polyurethane resin (GF/PUR) composites were investigated at ambie..
The characteristics of abrasive wear on sliding speed of glass fiber reinforcement (GF/PUR) composites were investigated at ambient temperature by pi..
The characteristics of abrasive wear of the rubber matrix composites filled with nano sized silica particles were investigated at ambient temperature..
The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very impo..
The friction characteristics of Al-Fe alloy powders are investigated in order to develop an eco-friendly friction material to replace Cu fiber, a con..
Metal matrix composites(MMC) can obtain mechanical characteristics of application purposes that a single material is difficult to obtain. Al2 O3/AC8A..
The friction and wear characteristics of the rubber matrix composites filled with nano sized silica particles were investigated at ambient temperatur..