Recently, with the rapid development in the industries such as mechanical plants, automobiles, ships and marine structures, it is enlarged by the use..
그러나 얇은 도막(90μm) 에서는 유속이 증가함에 따라 도막의 파괴가 진행되고 있음을 확인할 수 있었다. ... 도막에 가해지는 전단응력이 증가할수록, 즉 선박의 운항속도가 증대될수록 도막의 열화에 의하여 방식성능이 떨어짐을 확인할 수 있었다. ... 유기도막의 방식성능은 도막의 수지성분과 안료의 화학적 특성에 의존한다 전자는 부식인자의 침투를 차단 및 지연시키는 역할을 하며, 후자는 침투된 부식인자들에 의해 일어나는 부식반응을
An ACR/HMMM film was prepared by blending high-solid ACR with curing agent, hexamethoxymethyl melamine (HMMM). An active curing reaction was observed..
In the previous study, three kinds of monomers and the functional monomer, acetoacetoxyethyl methacrylate (AAEM), which could improve the film proper..
Environmental friendly acrylic/urea high-solid paint(MUHC) were prepared through the curing reaction of acrylics resin(EBHC) containing 70wt% of soli..
..PAGE:1 시트 방수, 도막 방수 목차 1. 방수의 기본 개념 2. 도막 방수의 정의 3. 도막 방수의 장/단점 4. 도막 방수의 사례 5. 시트 방수의 정의 6. ... 프라이머 도포 도막방수 시공순서 4. 4. 도막방수 1차 바름 5. 도막방수 2차 바름 6. ... 형성 하여 소요두께의 방수층을 형성하는 방수공법 기존 모르타르 방수제와는 달리 탄성이 있기 때문에 따른 여름과 겨울의 온도 변화에도 크랙 발생이 적다 도막 방수 정의 장점 단점 -
대상 표면의 도막 두께는 각각 96, 168, 226㎛ 이었다. 도막두께가 증가될 수록, 초기 체결이후 축력이완율은 도막의 크리프 때문에 10%에서 18%로 증가되었다. ... 본 실험결과를 근거로 각 도막두께에 대한 장기축력이완이후의 고력볼트 체결력에 관한 정량적인 수식 을 제안하였다. ... 장기축력예측을 위한 정량적 인 모델은 도막두께에 따른 크리프 스트레인과 경과된 시간사이에 회귀분석 결과로 얻어진다.
그리고, MWCNT의 효과적인 분산으로 PTFE 복합체 도막의 경도와 소수성이 증가되고, 전기 정도성을 부여하여 표면의 기능성이 증대됨을 보여주었다. ... 본 연구에서는MWCNT의 표면을 산화시켜 -OH기를 표면에 도입하고, 표면에 음전하를 증가시켜 불소 고분자(PTFE) 도막에서 MWCNT의 분산을 증대시켰다.
The flame-retardant coatings were prepared by blending the synthesized triphosphorus modified polyester in the previous paper and hexamethylene diiso..
For the synthesis of water soluble acrylic modified epoxyester resin, fatty acid/epoxy ratio of 50/50 was used, and introduced maleic anhydride. Rati..
PU type flame-retardant coatings (TBAO/L-75, TBAOL ; TBAO/N-100, TBAON) were prepared by blending bromine-containing modified polyester (TBAO) which ..
Modified polyesters (TTBA-10C, -20C, -30C) that contain phosphorus and chlorine were synthesized by the condensation polymerization of tetramethylene..
Two-component polyurethane flame retardant coatings (ATTBC) were prepared by blending polyisocyanate (TDI-adduct) with ATTBs mentioned at the previou..