[화학공학실험2] LAB2 Pressure drop measurement by a pipe accessory 결과레포트(영문)
- 최초 등록일
- 2020.08.24
- 최종 저작일
- 2020.04
- 9페이지/ 한컴오피스
- 가격 2,000원
* 본 문서(hwp)가 작성된 한글 프로그램 버전보다 낮은 한글 프로그램에서 열람할 경우 문서가 올바르게 표시되지 않을 수 있습니다.
이 경우에는 최신패치가 되어 있는 2010 이상 버전이나 한글뷰어에서 확인해 주시기 바랍니다.
소개글
"[화학공학실험2] LAB2 Pressure drop measurement by a pipe accessory 예비레포트(영문)"에 대한 내용입니다.
목차
1. Objective
2. Result
3. Discussion
4. Factors of error
5. Reference
6. Summary
본문내용
1. Objective
1) Learn about the continuity equation and the Bernoulli equation.
2) Measure the head loss at various diameter pipes and various fittings by measuring the pressure difference.
2. Result
Gravitational acceleration : 9.8m/s²
Temperature : 16℃
Density : 998.97kg/m³ (Table1)
Viscosity: 1.111cP (Table1)
Kinematic viscosity: viscosity/density = 1.112×10⁻⁶
Cross-section Area:
Flow rate(m³/s) : volume(m³) / time(s)
Velocity : Flow rate / Area
= diameter×velocity/kinematic viscosity
<중 략>
3. Discussion
1) Compare pressure drop (head losses) estimated from theory with that from experiment in each accessory. And then discuss which factors caused the error.
Straight pipe(10A, 15A, 20A)
Straight pipe which is 0.01m diameter has = 524m, and = 0.274m. At the 15A straight pipe, = 0.0763m, and = 0.048m. Values of head loss are = 0.0193m, and = 0.006m in the 20A straight pipe.
Each error factor is 47.7%, 37.1%, and 68.9%.
참고 자료
Manual_ChemE Lab II (2020) p.15 ~ p.23
"What is Deionised Water? Fortis Battery Care". Fortis Battery Care. 2016-04-15.