activators’ performance in terms of the indirect tensile strength, tensilestrength ratio, and indirect ... METHODS: An indirecttensile test, a tensile-strength ratio test, and an indirecttensile-fatigue test ... tensile-fatigue test.
with ferronickel slags improved the tensilestrength results to meet the standards. ... CONCLUSIONS : The tensilestrength ratio results of HMA mixtures with ferronickel aggregate did not meet ... PURPOSES : This study aims to conduct a laboratory evaluation on the use of ferronickel slag for manufacturing
tensilestrength test, tensilestrength ratio test, and dynamic modulus test.CONCLUSIONS:The use of ... To investigate the moisture susceptibility of the specimens, tensilestrength ratio (TSR) tests were ... inorganic additive enhances the indirectstrength and dynamic modulus performance of the asphalt mixture
The test results showed that the mixtures had the maximum indirect tensile strength(ITS) at low temperature ... Thus the effect of modification was revealed as tensilestrength improvement. ... In particular, loss of tensilestrength due to low temperature is known to be responsible for thermal
strength(DTS2) , indirect tensile strength(ITS) resilient modulus(MR) and stiffness index(SI) of sand ... This study was performed to estimate the high-speed direct tensilestrength(DTS1), low-speed direct tensile ... However, since the individual physical property showed a relatively low correlation, various properties
Marshall mix design, indirect tensile strength test, wheel tracking test and tensile fatigue test were ... Test result showed that some WPF asphalt mixtures had a high tensile property and good resistances against ... The objective of this study is to develop technology of making waste polyethylene asphalt mixture and
strengths. ... Therefore, the load P affects indirectly, if the specimen is warped a little or if the strain gage is ... In SS275, SS is Steel Structure, 275 means that the yield strength is 275 MPA min.
In addition, the Marshall stability, indirect tensile strength, and tensile-strength ratio (TSR) were ... in terms of the aggregate coverage (over 50%) and the indirect tensile strength (more than 0.4 MPa). ... The mixture test indicated that the indirect tensile strength and TSR increased with the increasing emulsified-asphalt
) was used as an asphalt modifier Marshall mix design, indirect tensile strength, tensilestrength ratio ... To improve tensile properties and durability of WFS asphalt concrete mixture, LDPE(low-density polyethylene ... Comparing with conventional asphalt concrete, WFS asphalt concretes showed similar or the better qualify
The indirect tensile strength ratio test indicates that TSR values of PWMA mixture, Indonesian PMA mixture ... Dynamic immersion test and indirect tensile strength ratio test are performed to evaluate moisture resistance ... to use in monsoon climate regions such as Indonesia.
immersion test, uniaxial compression test, and indirect tensile strength test (IDT). ... for each anti-stripping agent through various lab tests, namely, tensilestrength ratio (TSR), dynamic ... PURPOSES:The objective of this study is to evaluate the effect of anti-stripping on asphalt mixtures
modulus and indirect tensile strength. ... From the tests, slag mixture with carbon black or pyrolyzed carbon black showed better performances, ... such as, in low susceptibility to temperature, high resistance against water and rutting, and high resilient
Moreover, Marshall stability test, porosity test, and indirect tensile strength test were performed on ... However, it was determined that the strength and stiffness after three-day curing are higher than those ... standards, after a two-day curing.
Indirect tensile strength (ITS) was also measured on the specimens cured at different temperatures. ... This study showed how long the specimen should be submerged at 60°C for Marshall test and conditioned ... Although there is no regulation specifying how long the specimen should be conditioned before testing
Marshall mix-design, indirect tensile strength, freezing and thawing test, analysis of extracted water ... The objective of this study is to develop technology of making self-snow-melting asphalt pavement and ... This study is a fundamental research for developing self-deicing function of snow-melting asphalt concrete
The PU-2I binder concretes shows the largest value of indirect tensile strength and indirecttensile ... The indirect tensile strength test was conducted on polyurethane binder concrete with different gradation ... based on the bending strength.
stability test and 3) indirect tensile strength ratio test. ... Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions ... PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified
The test results showed that the mixtures had the maximum indirect tensile strength(ITS) at low temperature ... Thus the effect of modification was revealed as tensilestrength improvement. ... In particular, loss of tensilestrength due to low temperature is known to be responsible for thermal
strength(DTS2) , indirect tensile strength(ITS) resilient modulus(MR) and stiffness index(SI) of sand ... This study was performed to estimate the high-speed direct tensilestrength(DTS1), low-speed direct tensile ... However, since the individual physical property showed a relatively low correlation, various properties
The typical tensile property is measured by indirect tensile strength (ITS) test at 25℃ and the rutting ... Since the relatively stiff binder shows a higher tensilestrength as well as higher rutting resistance ... , it is believed that the binder stiffness is an important factor for rutting and tensilestrength of