아연분말의 실리카 표면코팅은 졸-겔법을 사용하였고 SEM/EDS의 표면 및 성분분석과 TEM 단면분석을 통하여 불순물이 잔존하지 않는 실리카 코팅이 성공적으로 형성됨과 그 코팅의 두께를 ... The silica coated zinc power was prepared from the ultra fine zinc powder via a sol-gel process. ... the relationship between the number of coating and the resulting particle size distribution(PSD), two-fold
synthesized by the sol-gel method without using any additional process. ... The sol-gel method is the simplest method for synthesizing monodispersed silica particles. ... The results show that monodispersed silica particles over a size range of 54-504 nm are successfully
Carbon nanotube(CNT) plays an essential role in various fields of nano based science and technology. Recently, silica coated CNT composites are inter..
이러한 졸-겔법으로 제조된 분말을 TG-DTA와 XRD 분석으로 결정화 및 상변화를 관찰하였다. ... 특히(111) 쌍정판은 합성된 겔을 1200˚C에서 하소한 후 이를 1400˚C에서 소결한 경우에만 관찰할 수 있었다. ... Ti(i-OC3H7)와 Ba(OH)2.8H2Or 그리고 공통용매로서 2-Methoxy Ethanol을 이용하여 균일 용액을 제조하고, 이로부터 미세하고 조성비가 균일한 BaTiO3분말을
BaTiO3 powders were prepared by sol-gel method from different concentration of KOH aqueous solution ... Particle shape, size and crystal structure of prepared BaTiO3 powders were analyzed by SEM, XRD, and FT-IR
Transparent films were prepared using the sol-gel process by mixing TEOS with PVA solution that was ... HCl, CH3COOH and NH4OH were used as catalysts of the sol-gel process, and for improving the flexibility
서론 졸-겔법의 연구는 1970년 이래 유리분야에서 졸의 겔화시 섬유, 벌크(bulk)체나 코 팅막으로 가열에 의하여 형상을 변형 시키지 않은 제품을 만들기 위한 겔분말 입자 의 제조연구가 ... 기본 원리 졸-겔법은 금속알콕시드(M(OR) , M : 금속, R : 알킬기), 또는 금속염의 출발원료로 부터 비정질 세라믹스(유리), 결정화 유리 및 세라믹스(소결다결정체, 박막 ... 즉 금속의 유 기 또는 무기 화학물을 적당한 액체의 용매와 함께 용액으로 만들고, 용액 중에서 화합물의 가수분해-중축합반응을 진행시키므로 액체에 미립자가 현탁된 졸(sol)이 되며,
탄소/탄소 복합재의 산화 저항성을 개선시키기 위하여 aluminum iso propoxide및 aluminum tri sec butoxide졸을 2D-탄소/탄소 복합재에 도포하여 산호 ... 도포막의 두께는 1회 도포막이 3μm, 2회 및 3회 도포막이 4-5μm 정도였고, 열충격 시험은 횟수에 따라 산화량이 증자하였다. 5% 전환률에서의 도포하지 않은 시편의 활성화 에너지는
졸-겔 법에 의해 합성된 세라믹 막을 통한 헬륨, 질소 투과 실험은 기체의 투과 특성을 파악하기 위하여 시행하였다. ... 본 연구에서 졸-겔 방법에 의하여 나노 기공을 가지는 세라믹막을 제조하여 단일 조성의 헬륨과 질소를 가지고 기체투과 실험을 수행하였다. ... 실리카 졸은 TEOS의 산 촉매 가수분해와 축중합반응을 통하여 합성하였다. 막은 딥코팅과 소결과정을 거쳐 제조되었다.
본 연구에서는 졸-겔공정에 의해 금속 alkoxide용액을 이용하여 강유전성 PMN분말 및 박막을 제조하였다. ... 열처리에 따른 gel 분말의 유기물 분해거동과 제조된 분말 및 박막의 열처리 온도변화에 따른 결정상 발달과정을 열분석, 적외선 및 Rarnan 분광분석과 X-선회절분석을 통하여 규명하였다 ... PM N박막을 820˚C에서 1분간 열처리하였을 경우에 제조된 PM N박막의 유전상수 값과 손실계수는 10kHz주파수에서 각각 2200~2700 및 -0.33의 값을 나타내었다.
xTiO2-ySiO2 system photocatalysts were developed by sol-gel method based on the change of production ... analysis of xTiO2-ySiO2 powder that is obtained from Titanium and Silicon alkoxide by sol-gel process ... ethanol and phenol degradation using the catalyst, the conclusions were obtained as follows: By means of X-ray
TiO2 nanoparticles were synthesized by a sol-gel process using titanium tetra isopropoxide as a precursor ... Ag-doped TiO2 nanoparticles were prepared by photoreduction of AgNO3 on TiO2 under UV light irradiation ... The photocatalytic properties of the TiO2 and Ag-doped TiO2 nanoparticles were evaluated according to